MY DYNO RUN

digitalsko · Post by **digitalsko** » Mon Aug 06, 2007 7:36 pm

well i think its pretty good considering i only have the standard l300 throttlebody :D :D
Big thanks goes to Matt @ PITS for putting up with me all arvo... and Luke for helping out with everything that has been done to the car. :beer

:D :D :D :D :D

Junkers · Post by **Junkers** » Mon Aug 06, 2007 8:51 pm

How many psi is that, you running a cooler?

digitalsko · Post by **digitalsko** » Mon Aug 06, 2007 11:22 pm

15ish PSI. i have a supra cooler...
the bottom line is the boost . the psi numbers are on the right but my scanner cut it off. :beer

redzone · Post by **redzone** » Mon Aug 06, 2007 11:52 pm

nice one, lots of power under the curve :beer

OLD FART · Post by **OLD FART** » Tue Aug 07, 2007 4:46 am

Well done it should feel nice & strong with a good shove in your back when the boost comes on :D

MrBishi · Post by **MrBishi** » Tue Aug 07, 2007 7:00 am

Good to see the car went to someone willing to take it to the next level.

Now all you need is a bigger cam, new inlet and an upgrade to the ignition and you will still want more :D

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Tue Aug 07, 2007 7:16 am

Good quality cooler and plenum/throttle body change would let you break the 200hp mark.

Looks to have very good mid-range

Post by **TOMSUN** » Tue Aug 07, 2007 10:48 am

Very strong curve.
What cam you running?

You planning on taking it to the drags?
Add your car to this list...
http://forums.austarion.com/viewtopic.p ... t=quickest

:D

digitalsko · Post by **digitalsko** » Wed Aug 08, 2007 9:37 am

yeah it feels nice wen it boosts now... and feels very strong. the next step is to get a front facing TB and plenum and decent cooler. then it will be the brakes :D
but until money grows on trees it will do for now...
TOMSUN its just a standard cam. and yes id like to take it to the drags soon, just gota learn how to launch it now :D:D:D

trackone · Post by **trackone** » Fri Aug 10, 2007 1:28 pm

your running a microtek system on your Ja thats nice I heard is hard to tune Ja with that system is that true.

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Fri Aug 10, 2007 2:01 pm

All depends on the tuner. My JA runs a Sonata inlet and the computer only controls the fuel, only uses TPS, MAP, RPM and water temp as load sensors and it runs fine with a NZ Link computer.

digitalsko · Post by **digitalsko** » Fri Aug 10, 2007 4:37 pm

your running a microtek system on your Ja thats nice I heard is hard to tune Ja with that system is that true.

yeah its a microtech digi1 with a hand controller. It wasnt too hard to tune but with a newer unit im sure it wouldve been quicker....
btw its a JB!!!!

Austarion

MY DYNO RUN

MY DYNO RUN

Who is online