clutch pedal dropping and "getting stuck"

All technical questions and answers regarding starions, being modifications to maintenance.
User avatar
Cordzboy
I like starions
Posts: 109
Joined: Sat Mar 06, 2004 1:09 pm

Post by Cordzboy »

I've got the same problem at the moment, but from what I could see it looks like the pivot ball for the clutch fork has broken off. Either that or it's fallen out, but there sure isn't anything for the fork to pivot on. I'll update tomorrow when I get the 'box out.
Cordia, powered by EVO...
FlawlessVictory
tosser
Posts: 72
Joined: Thu Dec 14, 2006 2:04 pm
Location: Liverpool links

Post by FlawlessVictory »

10/10 clutch fork problem as i initially mentied first, cant wait for the result when you have the box removed.
User avatar
Cordzboy
I like starions
Posts: 109
Joined: Sat Mar 06, 2004 1:09 pm

Post by Cordzboy »

Closer inspection revealed a brittle fracture on the end of the pivot where there used to be a ball. Looks like the box is definitely coming out.
Cordia, powered by EVO...
benny
I love starions
Posts: 464
Joined: Mon Dec 04, 2006 8:53 pm
Location: gladstone

Post by benny »

well i sort of had clutch today, did a quick bleed and all looked good until 30 mins later as i watched the pedal hit the floor again....

taking master apart tomorrow.. where can i get parts to "reco" it??
Image
Chris 83JA
almost postwhore
Posts: 1015
Joined: Sat Jan 10, 2004 12:02 pm
Location: Ballarat, Victoria, Australia
Contact:

Post by Chris 83JA »

Most auto stores should have a rebuild kit, I remember buying one for about 10 bucks a few years ago.
Been fine ever since too :)
User avatar
chunkhead
Mmmmm, I love rice
Posts: 1198
Joined: Thu Sep 30, 2004 2:57 pm
Location: Melbourne

Post by chunkhead »

My clutch did this after it was installed. It had an air block in the line. I simply removed the cap on the reservoir and manually pump the clutch up and down until it returned to full pressure. I had to do this for about 6 days in a row, but it's been solid ever since! :wink:
Gone V8 Hunting: Be Back In Seconds!

For Sale:
Xbox/360/Wii Mods Now Available
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

Check the rubber hose off of the slave cylinder to the master, it may have gone soft and is ballooning under pressure.

This also happened to my starion until the hose actually burst, nearly hit the car in front of me (as the clutch was engaged), then I had no clutch at all just heaps of smoke at the lights.

How embarrassing :roll:
benny
I love starions
Posts: 464
Joined: Mon Dec 04, 2006 8:53 pm
Location: gladstone

Post by benny »

well i can get to the shops and back if i pump it up by hand though by the time i pull into the park or my driveway i have no clutch at all.. lol
Image
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

Maybe the rubber pipe has collapsed inside, only causing enough pressure for a small time period.

This may be a possibility as rubber pipes do deteriorate after time.

The clutch may bleed normally but there could be a small piece of rubber blocking the hose once pressure is applied.

Replace the hose and see how ya go, can't hurt.
User avatar
rallidave
Enthusiast king
Posts: 889
Joined: Mon Feb 27, 2006 11:14 pm
Location: cairns

Post by rallidave »

PEOPLES......

i have avail up here new seal kits for brake/ clutch master cylinders and clutch slave cyls, usually about $30-40 a kit but ill see what i can do for austarion forum members,
hey i might as well do something to contribute to this site :)

the only thing is the bore in the cylinder, if it is no good the cylinder will have to get sleeved, or a new kit will just leak, this is not a cheap process, especially including friegt to and from cairns,
so,
i will do some research asap, and get you guys a good firm price on new cylinders brake and clutch, also price on kits, always available,

KEEP WATCHING THIS TOPIC - im sure i can do a good deal for you all,
p.s btw i work at knights brake specialist, so nothin dodgey goin on :D
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests