My other project car......

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

My other project car......

Post by redzone »

1975 TX gemini coupe, powered by a full house Isuzu 4ZD1 rodeo motor, garrett GT3040R BB, 65mm ext gate, ford top loader liberty geared(clutchless shift) 4 speed box (to be bought still) and borg warner 28 spline LSD disc brake 3.7 ratio diff.

aiming for 9 sec quarters running 26X8.5 inch slicks. micheal sheringhams FJ20DET auto gem runs 8.81 untubbed so its not unachievable! weighs 898kg stock, prob around 1000kg including driver when all done... so building around 550 flywheel horsepower should do the trick!

so now u all know why i`m selling the orange car..... :pimp

Image
Image


paint was done 3 years ago, cost me 5 grand. still looks like it was done yesterday! i`ve owned this thing since 1997, had it on the road looking very similar between 2000 and end of 2002 with an EFI G200, did flat 15`s. too slow!

getting enthused about it again, made a promise to myself that i wouldn`t race at jamboree next year unless its in this thing!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
grothie1978
I love starions
Posts: 397
Joined: Thu Jun 22, 2006 9:23 am
Location: PMQ, NSW

Post by grothie1978 »

FARK ME
this thing will be wild
mmmm, take me for spin? :beer
--Many Thanks--
REPREZENTIN'
Image
http://www.freeyabb.com/forums/unstable.html <---REGISTER HERE
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah should be fun! i think there`ll be a long line of people wanting a ride eh LOL

money from the orange car pays for injectors engine internals ECU gearbox & diff conversions and some interior retrimming work. probably take me 6 months to finish after the orange thing is gone..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
spud
Dorifto!
Posts: 61
Joined: Thu Jun 29, 2006 5:56 pm
Location: Sunshine Coast

Post by spud »

This thing is going to be a weapon when its finished, i can literally stick my fist in the turbo :)

Oh yeah Dave, see your number of posts 666 :twisted: oh yeah!!
....Thundercougarfalconbird
g_u_r_u
Big Dorifto
Posts: 79
Joined: Sun Aug 06, 2006 6:53 pm
Location: MT TAMBORINE

Post by g_u_r_u »

Are you running the torque tube arrangement on the diff or has that been modified?
AWAITING MY INHERITANCE!!
User avatar
kit
Enthusiast king
Posts: 788
Joined: Sat Sep 17, 2005 11:43 am
Location: Brisbane

Post by kit »

Congrats on the baby on the way G.U.R.U your dad say he will be the number one grandad again.
1982 Ja single cam 4g63 342.6bhp @ the wheels full show car imaculate
1985 Jb Fully stock original imaculate
2005 Ford Transit Jumbo & 2008 transit mwb
2008 VW Caddy Maxi 2006 hiiace commuter
2010 Toyota pardon kakadu and 2011 hiiace
2010 and 2013 VW Crafter 50 OH
2012 GLX R triton
g_u_r_u
Big Dorifto
Posts: 79
Joined: Sun Aug 06, 2006 6:53 pm
Location: MT TAMBORINE

Post by g_u_r_u »

Thanks.... I think - another 3 years or so of nappy changes :( but at least the making it part was fun :D
AWAITING MY INHERITANCE!!
TWIMCAM BOY
I like starions more
Posts: 152
Joined: Wed May 04, 2005 11:26 pm
Location: Gold Coast

Post by TWIMCAM BOY »

thats a WICKED setup mate. i love the gemini coupes i had one before my starion. IT WILL BE ONE FUN CAR TOO DRIVE!!!

My mate ran a mk1 escort (420rwhp)down the quater with street slickes
10.81 132mph 1.6 60ft with slow gear changes.

It now puts down 490rwhp and is nuts on the street!!! :D

CANT WAIT TO SEE YOURS IN ACTION
GO HARD OR GO HOME
User avatar
cannonball_kid
[L] Plates
Posts: 16
Joined: Tue Jul 04, 2006 10:49 am
Location: Busy convincing my wife to let me buy a Staz...

Post by cannonball_kid »

"It rubs the lotion on it's skin..." This puppy should put all those pushrod V8 F%$KWITS in their place! Good to see you are finally having your finger removed from your ass and finishing the Green machine off. :beer cheers to tha mad scientist! Fully hectic bro! :D
If it won't go...FORCE IT!
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

wow dave thats amazing!!!

those rodeo motors are the go what a tough unit!!!

this might JUST be a good enough reason to sell the orange one rofl :wink:
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

and years later... i might update this thread lol


jambo this year was awesome, i top qualified in street class and got runner up on 11.00 dial in's





here's the final:



so i now have to get the car tech'd..

i was running full street trim all weekend, 225/50/15 ET streets, all i did was drop the tyres pressures! it dyno'd 422rwhp on 26psi, i was running 22psi at jambo & about 370rwhp so i wouldnt run a 10. ha bloody ha!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Nice one Dave! :beer
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

Very nice dave. Very nice
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

congrats :beer
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Cheers guys.

Oh and I'm running a second hand 2.6 rodeo gearbox and normal gem diff with a custom lsd and 28 spline axles :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests