how do i remove window tinting
how do i remove window tinting
i need help haw do i remove that gay blue windowtinting from the 80's i tryed peeling it but it fucked up
do i use a hair dryer i heared from a mate that that might work
big moz :pimp
do i use a hair dryer i heared from a mate that that might work
big moz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
best to use a steamer or a heat gun hair dryer don't work. that will get the tint of then you need to scrape the glue of the glass with a single edge scrape blade but don't scrape the back window you will stuff the demisters you will need steel wool for that and a lot of scrubbing its a prik of a job.
starion (sex on wheels)
soapy water and a razor blade. get the razor under the tint then peel, add the water every now and then. sometimes you get a lucky streak and it doesn't rip and you get a whole chunk off! peice of piss once you get the courage.
_
_________________
_________________
hey nice to see you on the forum gary!
i think you should show them a pic of your tint ;)
if you don't have a steam gun, you could always grab a girly and have a nice hot session in the car with the windows down, that should create enough steam to soften the glue ;)
i think you should show them a pic of your tint ;)
if you don't have a steam gun, you could always grab a girly and have a nice hot session in the car with the windows down, that should create enough steam to soften the glue ;)
_
_________________
_________________
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
K+H Wax and grease remover is tops for removing the glue. In fact, if you put some directly on the tint itself, it should lift off pretty easy. Hopefully.
I use this stuff to remove stickers and the residue that they leave...
Just my 2 cents...
I use this stuff to remove stickers and the residue that they leave...
Just my 2 cents...
tint - use this pic. 1.6mb is a bit much for that little pic :o
http://homepages.ihug.co.nz/~doms/tinting.JPG
http://homepages.ihug.co.nz/~doms/tinting.JPG
...
i think ill just get some one to remove it when i get it redone
bigmoz :pimp
bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Who is online
Users browsing this forum: No registered users and 9 guests