how do i remove window tinting

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Post Reply
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

how do i remove window tinting

Post by bigmoz »

i need help haw do i remove that gay blue windowtinting from the 80's i tryed peeling it but it fucked up

do i use a hair dryer i heared from a mate that that might work



big moz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

best to use a steamer or a heat gun hair dryer don't work. that will get the tint of then you need to scrape the glue of the glass with a single edge scrape blade but don't scrape the back window you will stuff the demisters you will need steel wool for that and a lot of scrubbing its a prik of a job.
starion (sex on wheels)Image
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

soapy water and a razor blade. get the razor under the tint then peel, add the water every now and then. sometimes you get a lucky streak and it doesn't rip and you get a whole chunk off! peice of piss once you get the courage.
_
_________________
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

you sound like a pro decoy the way to stop it ripping is useing steam it sofens the glue but good point with the soapy water
starion (sex on wheels)Image
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

hey nice to see you on the forum gary!

i think you should show them a pic of your tint ;)

if you don't have a steam gun, you could always grab a girly and have a nice hot session in the car with the windows down, that should create enough steam to soften the glue ;)
_
_________________
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

good one i better not try that then my tint mite fall of haha. i'll try get a pic on
starion (sex on wheels)Image
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

starion (sex on wheels)Image
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

K+H Wax and grease remover is tops for removing the glue. In fact, if you put some directly on the tint itself, it should lift off pretty easy. Hopefully.
I use this stuff to remove stickers and the residue that they leave...

Just my 2 cents...
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:

Post by hcca »

For $50 a tint place will do it for you.. money well spent in my opinion :)
Dr-X
[P] Plates
Posts: 35
Joined: Sun Apr 10, 2005 4:16 pm
Location: Tauranga, New Zealand

Post by Dr-X »

tint - use this pic. 1.6mb is a bit much for that little pic :o

http://homepages.ihug.co.nz/~doms/tinting.JPG
User avatar
AXELR8
I love starions
Posts: 361
Joined: Sun Feb 29, 2004 6:01 pm
Location: Adelaide

Post by AXELR8 »

I personally would listen to the advice of tint(gary), as he is a window tinter by trade, and does this job (removing tint) nearly every day. steam gun makes for easy work.......
You think that's fast??? You got nothin' on Roger!!
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

thanks dr-x but you can inlarge it.
starion (sex on wheels)Image
tint
Big Dorifto
Posts: 81
Joined: Mon Apr 25, 2005 3:35 pm
Location: adelaide

Post by tint »

sorry disregard last message just working this out
starion (sex on wheels)Image
fil
I've been here before
Posts: 246
Joined: Mon Feb 16, 2004 4:34 pm
Location: Sydney

Post by fil »

be carefull i completly stuffed one of my windows attempting this
Starions: The wedge with the edge !
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

...

Post by bigmoz »

i think ill just get some one to remove it when i get it redone



bigmoz :pimp
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests