Burnouts in turboed cars
-
- I've been here before
- Posts: 206
- Joined: Sun Aug 01, 2004 10:37 pm
- Location: QLD
Burnouts in turboed cars
hey guys a few mates have been telling me not to get a turbo car simply because when you do a burn out the spindals in the turbo break n find there way into your engine so then ur stuffed :o . has anyone had this happen to them or know if anything stuff's up when u hit boost on a burnout???? or if anything can stuff up if u do continous burnouts? besides the usual stuff like clutch n gearbox
thanks for the help mates!
thanks for the help mates!
tell your mates to go to the drags next time and see how many turbo cars do burn outs that'd bring tears to your eyes, not from the emotional experience but from the smoke... seriously I don't think doing burn outs will do damage to the turbo, do you know 'floorit' by any chance??
:D
:D
Kiss my st AZZ -
Starions rule the sports car world
GTI-R's are best in the wet..
Who needs Rock & Roll when there's JAZZ, Honda RULEZ
Starions rule the sports car world
GTI-R's are best in the wet..
Who needs Rock & Roll when there's JAZZ, Honda RULEZ
-
- I've been here before
- Posts: 206
- Joined: Sun Aug 01, 2004 10:37 pm
- Location: QLD
- Powerslave
- Mine is bigger than yours
- Posts: 282
- Joined: Sun Jan 18, 2004 1:12 am
- Location: Brisbane , Queensland
I have seen a nissan spit it's ceramic turbine wheel (or pieces of it) through it's exhaust pipe (it was a skyline GTR) while doing a burnout. Otherwise on a non ceramic turbo , if the compressor wheel let go then it indicated a faulty turbo , and could have done it while doing a burnout or just by cruising along. Doing burnouts will show any faults in your turbo in a real hurry , though cause it does stress the turbo.
- cheaterparts
- I love starions
- Posts: 351
- Joined: Mon Sep 27, 2004 7:36 pm
- Location: melbourne aust
Re: Burnouts in turboed cars
think about itjameshey_1 wrote:hey guys a few mates have been telling me not to get a turbo car simply because when you do a burn out the spindals in the turbo break n find there way into your engine so then ur stuffed :o . has anyone had this happen to them or know if anything stuff's up when u hit boost on a burnout???? or if anything can stuff up if u do continous burnouts? besides the usual stuff like clutch n gearbox
thanks for the help mates!
Is there more load on a turbo doing burn outs than running boost at speed
prob not ( doing a burnout is your foot flat cos it would be at 250 Ks )
your mates are having a lend of you
cheater
Re: Burnouts in turboed cars
That's why you use an intercooler. It acts as a filter to stop any bits off the turbo flowing into your engine if the turbo disintegrates. ;)
:D
:D
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
- cheaterparts
- I love starions
- Posts: 351
- Joined: Mon Sep 27, 2004 7:36 pm
- Location: melbourne aust
Re: Burnouts in turboed cars
So if you put a bigger turbo on you need a bigger intercoller to catch more bitsNXTIME wrote:That's why you use an intercooler. It acts as a filter to stop any bits off the turbo flowing into your engine if the turbo disintegrates. ;)
:D
cheater
Yes, that is why I have a big turbo and huge cooler. I even catch speed humps and low flying birds.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
- ninja_j_dawg
- [P] Plates
- Posts: 39
- Joined: Thu Oct 28, 2004 6:26 pm
- Location: Adelaide
yeah the ceramic turbine t25-t28's arnt meant to be boosted over like 12-14 psi, or they do that....age doesnt help them either...Powerslave wrote:I have seen a nissan spit it's ceramic turbine wheel (or pieces of it) through it's exhaust pipe (it was a skyline GTR) while doing a burnout. Otherwise on a non ceramic turbo , if the compressor wheel let go then it indicated a faulty turbo , and could have done it while doing a burnout or just by cruising along. Doing burnouts will show any faults in your turbo in a real hurry , though cause it does stress the turbo.
Re: Burnouts in turboed cars
roflcheaterparts wrote:So if you put a bigger turbo on you need a bigger intercoller to catch more bitsNXTIME wrote:That's why you use an intercooler. It acts as a filter to stop any bits off the turbo flowing into your engine if the turbo disintegrates. ;)
:D
cheater
skids are sic
_
_________________
_________________
Who is online
Users browsing this forum: No registered users and 1 guest