hey guys i go finally got around to putting the 3.9 in the car although when i went to remove the breather at the top of the diff it cracked into a couple of bits.
i tried bursons, a wrecker and a 4wd place but all of them came up empty. does anyone have one? or know where i can get one
(similar look to this http://www.3sx.com/store/comersus_viewI ... duct=25093)
also when i changed the suspension and diff i noticed all the bushes are on there last legs ive looked at the mookeeh ones from the states but the site says they are all out and i keep on getting returned emails from the guys server on this site
http://www.starionpartsfactory.com/suspension.html
thanks for your help
morris
wanted: diff breather, poly urethane bush kit
wanted: diff breather, poly urethane bush kit
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
The Forum Parts Guy
www.vibrantperformance.com for all your performance fabrication needs
IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car
Here to run out of your life & take all your money!
www.vibrantperformance.com for all your performance fabrication needs
IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car
Here to run out of your life & take all your money!
The vent doesn't screw in, it's rubber and pushes in doesn't it? (been a while since I was up under there)
I'll have one if it does screw in or you can figure out how to do it.
Moz's link is busted...this one ?
*edit* Older Pajero front diffs (pre 93) may also have the rubber vent plug...worth pursuing further?
I'll have one if it does screw in or you can figure out how to do it.
Moz's link is busted...this one ?
*edit* Older Pajero front diffs (pre 93) may also have the rubber vent plug...worth pursuing further?
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
was the 3.9 out of the JD i have here?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
nope, i bought it from someone on the forum about 2 years ago, up NSW way if my memory serves me correct
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
Fair enough, the mystery continues...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
its this one at the bottom of the page, tenth last photo. thats what im looking for
any one know about the bushes too?
moz
any one know about the bushes too?
moz
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
With regard to the bushes, I read on Starquest that Mookeeh will eventually do another batch....but don't hold your breath.
All bushes are available on ebay with the whiteline and and (fulcrum) Superpro stuff. More than half the stuff is from overseas sellers.
A lot of the Whiteline stuff is shown as n/a in Australia, and there are 3 set of bushes for the rear end control arms etc.
Adds up when you buy them separately....
All bushes are available on ebay with the whiteline and and (fulcrum) Superpro stuff. More than half the stuff is from overseas sellers.
A lot of the Whiteline stuff is shown as n/a in Australia, and there are 3 set of bushes for the rear end control arms etc.
Adds up when you buy them separately....
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Who is online
Users browsing this forum: No registered users and 37 guests