wanted: diff breather, poly urethane bush kit

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

wanted: diff breather, poly urethane bush kit

Post by bigmoz »

hey guys i go finally got around to putting the 3.9 in the car although when i went to remove the breather at the top of the diff it cracked into a couple of bits.

i tried bursons, a wrecker and a 4wd place but all of them came up empty. does anyone have one? or know where i can get one

(similar look to this http://www.3sx.com/store/comersus_viewI ... duct=25093)

also when i changed the suspension and diff i noticed all the bushes are on there last legs ive looked at the mookeeh ones from the states but the site says they are all out and i keep on getting returned emails from the guys server on this site

http://www.starionpartsfactory.com/suspension.html

thanks for your help

morris
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

Could always get one of these put in it's place

http://www.vpw.com.au/Category/Index/164857

Image
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

The vent doesn't screw in, it's rubber and pushes in doesn't it? (been a while since I was up under there)

I'll have one if it does screw in or you can figure out how to do it.

Moz's link is busted...this one ?

*edit* Older Pajero front diffs (pre 93) may also have the rubber vent plug...worth pursuing further?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

was the 3.9 out of the JD i have here?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

Post by bigmoz »

nope, i bought it from someone on the forum about 2 years ago, up NSW way if my memory serves me correct
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Fair enough, the mystery continues...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Bugger the mystery.....anyone found a bung yet?

MB160950 shows up in the catalogue as 92 Pajero vent plug...but the pic shows a bung and an elbow. Anyone got an old Pajero they can look at the front diff vent bung?
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

Post by bigmoz »

its this one at the bottom of the page, tenth last photo. thats what im looking for

any one know about the bushes too?

moz
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

With regard to the bushes, I read on Starquest that Mookeeh will eventually do another batch....but don't hold your breath.

All bushes are available on ebay with the whiteline and and (fulcrum) Superpro stuff. More than half the stuff is from overseas sellers.
A lot of the Whiteline stuff is shown as n/a in Australia, and there are 3 set of bushes for the rear end control arms etc.
Adds up when you buy them separately....
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Post Reply

Who is online

Users browsing this forum: No registered users and 34 guests