FOR Sale 1984 JA Mitsubishi Starion

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

FOR Sale 1984 JA Mitsubishi Starion

Post by starion1984 »

As title says, i'm regrettably selling my pride and joy of the last 10 years due to my growing family.

I have all receipts, dyno's and paperwork from everything I've spent on this car. It owes me over 22,000$.

I'm being realistic and asking $2000 with rego until April.

Here is a list of mods to date.

-Engine (that used to be in the car)

- Balance shafts removed
- Full engine balancing
- Bored and honed
- Forged pistons
- O ring block
- Main stud kit
- Custom exhaust manifold
- Custom high volume sump
- Race ported head
- Heavy duty valve springs
- Custom stage 4 camshaft
- Head stud kit
- Copper head gasket

Engine Management:

- Microtech LTX-8
- Multi point injection conversion
- Custom intake plenum
- Larger throttle body
- MSD Coil
- Custom fuel system & Fuel Pump
- High flow fuel regulator and lines

Turbo and Intercooler:

- Garret GT2871R
- Custom intercooler
- Customer intercooler piping
- Blow off valve
- Custom Exhaust Manifold

Drive train and suspension:

- Lightened flywheel
- Extreme Heavy duty clutch
- Custom lowered hardened springs
- Custom hardened shock absorbers
- All Bushes replaced
- Slotted Rotors
- JD LSD 3.55 Diff
- Re-co'd Balanced Tailshaft

Other Modifications:

- Relocated power steering reservoir
- Dash mounted boost gauge
- 16” Wheels
- Re trimmed Front Seats
- JB Taillights
- Custom Side Skirts
- After market steering wheel
- Next to Immaculate Tan & Brown interior

Bonus parts kept as spares:

JA Front Bar (white)
JA Rear Bar (white)
Left Passenger Fender (white)
Left Hand Door (white)
TC06 Turbo & Manifold (polished)
Misc parts: steering pumps, reservoirs, Dash Covers, and heaps of other interior bits, etc.

All work was done by Beyond the Limit over the years.
Car has never been molested or abused.

It was in Melbourne's Auto Salon and Pictured in Fast Fours Starion Meet back in 06'.

Car is straight but due to weather does need a re-spray.

Another downside is that there is no engine in the car. I have all the parts (pistons, crank, rods etc) but no engine. I blew the head and was going to refresh the entire engine. I wanted to start again so the head was thrown as it had crack in it and the bottom end was thrown so we could start from scratch again.

This is a link to a page i made when i first got the car,

http://www.cardomain.com/ride/682196/19 ... hi-starion

Here are latest pictures i have

http://www.facebook.com/media/set/?set= ... 6fcdc32981

Any Questions feel free to message me or call me on

0403021955.

Please no time wasters, as i know us starion owners aren't the richest bunch but what your getting outweighs the asking price.

Cheers,
Aaron.
Last edited by starion1984 on Wed Jan 25, 2012 11:13 pm, edited 1 time in total.
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
evo starion
[L] Plates
Posts: 14
Joined: Sun Jan 09, 2011 9:53 am
Location: adelaide

Post by evo starion »

i want. so you saying engine is out of the car?
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

Damnit, why do these things come up at the worst possable time!
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

fuck that's cheap! wish i lived closer!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

@ evo starion
Yes, the engine is out of the car.
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

@ Redzone,
Yea i know its cheap, i can't believe i'm doing it, but i'm being realistic here.
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Had a chat to Hugh (Mitsumadness) about it yesterday....
I have a vr4 piston bottom end with about 20,000km that can handle about 15-18lbs boost.
Can offer it cheap if you or Hugh decide to put it together to get car going! Shame to see it go with a chance to be a donor/parts car!
:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

This was a beautiful car two or three years ago... Aaron, one question: wtf:?

I can't believe you let the paint go to shit...

Is there rust too?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

The car still is beautiful, i don't want to let it go but its just how its panned out...
There isn't rust, well no new rust, same rust that i've contained when i got the car. Like i said i've maintained the car since i owned it.

I didn't let the paint go to shit, it was just the natural digression of it.
I was a deatiler for 4 years i did the best i could to stop the oxi but lost the battle, the roof and bonnet need a cut, but they have been cut so many times it'll last 6 months and you'll have to constantly do it...

My bottom end is purrrr fect, its just the head that needs reco'in, not massive job i know but i can't justify spending more on a two door car that can't fit a pram in the boot any more...

oh my number is 0403029155 for those who said they couldn't get through.
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Hi Aaron! Hugh here!
Yes, I am (and have been since Chris mentioned it to me recently) seriously considering if I can find a way to buy this - it would thoroughly suit my track/drift Starion plans, and also mean that roadworthy and such would not be an issue for me. Definitely a good price - only challenge for me is I'm trying to extend our workshop at home at the moment and have stuff piled up in the way until I have more storage space, so money's all going to that!

But I'm trying to see what I can do, and if I can figure something then I'll buy it! I have spare heads etc for in case I needed to rebuild one at some stage too, so that should be no issue.
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

Hey Mate, long time no hear..
Sounds fine by me, i'd hate to see her stripped but if she gets to stretch her legs on the track again i'd be happy to see that...
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Yeh! I've been keeping an ear out about your car through Chris too. Heard about the head and saw it recently when it was in his workshop. Would be a perfect car for me to make into a track monster :D
I like the thought of it, cos yours was the first powerful Starion I got a ride in! It helped inspire me to keep going with them.

Will just see how I go though - if someone else gets to this before me, that's ok.

Cheers mate :beer
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

No problem mate, good to hear!
Well she's all tucket away just relaxin' let me know how you go mate.
Cheers
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
flav
Austarion Occupant
Posts: 3374
Joined: Thu Apr 15, 2004 9:57 pm
Location: Melbourne

Post by flav »

This is really sad. I remember seeing this car years ago and you kept it in really good nick then. Unfortunately this is the way things go naturally. It would be a great project for someone with a bit of time. If you don't sell it soon gimme a bell. Im sure i can move it for u.

You have a bub now yeah?
starion1984
[P] Plater austaz
Posts: 24
Joined: Wed Dec 16, 2009 2:45 pm
Location: Melbourne
Contact:

Post by starion1984 »

Yea the car was A1 with me, but yea i just can't justify building another engine for a car that is just not practical for me any more....

Shame..

Would be a good project if anyone wanted to take it on, but i'm again realistic as everyone on this forum are probably already up to their necks in their own cars...

Car is still waiting for a buyer so if your interested let me know champ.

Yeah, got a 2 year old and another on the way so its the natural progression of these things...
"No problem can be solved from the same level of consciousness that created it". - Albert Einstein
Post Reply

Who is online

Users browsing this forum: No registered users and 5 guests