STARION D2 COILOVERS - GROUP BUY - A$1,220 landed
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
or drive out of corners
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
-2 is hardly much at all - with the Starion rear suspension it doesn't actually increase the negative camber by a huge amount compared to other IRS designs of the same era, ie the Toyota flappy trailing arm setup of the 80s, which when lowered 50-60mm will give you like -5deg of camber.
Many production vehicles of today have almost -2deg of camber in the rear from the factory - my stock height E39A Galant VR-4 sits at about -1.5deg on the rear. To me I think sports cars kind of look whack without at least a little bit of negative camber both front and rear. Negative camber will actually aid with traction in the corners as the body rolls.
Many production vehicles of today have almost -2deg of camber in the rear from the factory - my stock height E39A Galant VR-4 sits at about -1.5deg on the rear. To me I think sports cars kind of look whack without at least a little bit of negative camber both front and rear. Negative camber will actually aid with traction in the corners as the body rolls.
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
i'm not referring to toyota's here bud, i'm talking about real world experience with starions!dirtygalant wrote:-2 is hardly much at all - with the Starion rear suspension it doesn't actually increase the negative camber by a huge amount compared to other IRS designs of the same era, ie the Toyota flappy trailing arm setup of the 80s, which when lowered 50-60mm will give you like -5deg of camber.
Many production vehicles of today have almost -2deg of camber in the rear from the factory - my stock height E39A Galant VR-4 sits at about -1.5deg on the rear. To me I think sports cars kind of look whack without at least a little bit of negative camber both front and rear. Negative camber will actually aid with traction in the corners as the body rolls.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
i wasnt, when you lower one, they get a lot of rear camber! the lower you go, the more taily they get, unless you can reduce the rear camber.
The group A car i work on, has adjustable lower arms, it has less than 2 degrees camber even though it's on slicks! it makes a big difference to these cars..
The group A car i work on, has adjustable lower arms, it has less than 2 degrees camber even though it's on slicks! it makes a big difference to these cars..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- Sargeant_Khan
- Enthusiast
- Posts: 673
- Joined: Thu Dec 16, 2004 9:31 pm
- Location: Ipswich
how much camber does it run on the front?
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
bout 3 i think, i dont do the alignments..
found out something interesting regarding starion rear suspension setup today, i'll keep you posted if we get anywhere with it
found out something interesting regarding starion rear suspension setup today, i'll keep you posted if we get anywhere with it
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- [L] Plates
- Posts: 10
- Joined: Wed Jan 18, 2006 6:51 am
- Location: Sweden
-
- Austarion Occupant
- Posts: 3578
- Joined: Tue Apr 06, 2004 1:21 pm
- Location: Melborno
- Contact:
That sounds interesting? Anything to report yet?redzone wrote: found out something interesting regarding starion rear suspension setup today, i'll keep you posted if we get anywhere with it
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
-
- [L] Plates
- Posts: 10
- Joined: Wed Jan 18, 2006 6:51 am
- Location: Sweden
Who is online
Users browsing this forum: No registered users and 20 guests