The Nissabishi Conquest

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

The Nissabishi Conquest

Post by NachoMan »

Hi all.
By now most of you know that I've bought Starion4me's, (Jason's) Widebody Staz.
This is just to show those of you who are interested, what's been happening with the car...


1. I've fixed this...
Image
This was several decent cracks in the exhaust manifold, as well as a nice BIG hole.


2. I've replaced these...
Image
With these...
Image
Race seats just aren't the thing to get in and out of for daily driving, so they've found a new home in my JA.
The replacement seats were originally cracked and torn grey leather from a JA wreck that I had. I had them re-upholstered, and the headrest and backs dyed. The driver's seat has also been specifically remade so that you sit lower in it.


3. As this car will become a daily driver, some sound deadening was needed...
Image
There was nothing to absorb the sound or reflect the heat here before, so I added some deadening, and mounted the stock JD/GSR-V heatshield on top to reduce noise and vibration.
There was also nothing against the firewall, so some deadening was required here too...
Image
I may add some thicker stuff here still because it's still a bit too noisy.


4. The original rear muffler seen here...
Image
wasn't really making the right noise, and upon removal, the cause was discovered...
Image
So I replaced it with this...
Image
Which sounds better, doesn't look like you're dragging around a water storage tank, and flows just as well.
The exhaust also had some movement underneath the car due to some of the mounts being broken, so that was corrected. It no longer scrapes on every speed bump encountered!
:)
[
User avatar
MR Bender
Enthusiast king
Posts: 754
Joined: Sun Nov 11, 2007 8:01 pm
Location: Perth Western Australia (SOR)

Post by MR Bender »

nice crack pipe!
Bite my shiny metal ass!!!

Russell Coight: Some of the animals are nocturnal, so the best time to see them is at night. Only you can't see them, because it's dark.
User avatar
jwebb2876
I've been here before
Posts: 248
Joined: Wed Sep 03, 2008 10:53 am
Location: parkes

Post by jwebb2876 »

Holy big pictures batman! :o
Anyways, how's she go?
"Speed isn't everything; you gotta look cool on the touge too."- Keiichi Tsuchiya
gj2600.wordpress.com
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

She goes bloody fast!
The car is a credit to Jason, and asides from a few little niggly things here and there, will be the ultimate Nissabishi by the time I'm finished with it! :)
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

Looks like the right person bought this car! Good work!
Update those taillights!
:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

JDSTAZ45 wrote:Looks like the right person bought this car! Good work!
Update those taillights!
:beer
Yeah I've got a set of JB/JD tailights to swap in.
It'll look better me thinks...
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

lol, those taillights are off my parts car i believe!

i heard about what happened to it during transport.. really sad to hear about it.. but i'm sure you'll get it sorted soon enough.

congrats on the buy!!
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

say, since you are replacing the front seat to a reclineable one, will you (be able to) re-register it as a 4/5 seater or still remain as a 2 seater?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

thrash wrote:lol, those taillights are off my parts car i believe!

i heard about what happened to it during transport.. really sad to hear about it.. but i'm sure you'll get it sorted soon enough.

congrats on the buy!!
What happened during transport?
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

the exhaust mani cracks..?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

thrash wrote:the exhaust mani cracks..?
It was cracked when I first drove it in Sydney, but it got worse very quickly when I got it.
I suspect that it probably had a bump or 2 whilst in transit, and a couple of of drives was enough to turn it to shit.
It's fixed now anyway, so no more dramas from that at least...
User avatar
mrb1
gtpumps.com.au
Posts: 1559
Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:

Post by mrb1 »

All you have to do now is get rid of that SR20 thing under the bonnet :D

Anyhow nice car.
NachoMan
nearly postwhore
Posts: 1589
Joined: Sat Jan 10, 2004 12:28 pm
Location: Perth (Morley), WA
Contact:

...

Post by NachoMan »

GRRRR!
Exhaust turbo manifold has cracked again! In a different spot though this time!
I'm going to replace it, but I'll need to find something similar in style, but much better quality.
Apparently the current manifold is a 'Trust' brand one.
All I can say is it's garbage!
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

there's a dude selling a hks GT2530 and a 6boost SR manifold on secretdrift at the moment.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
MrBishi
nearly postwhore
Posts: 1683
Joined: Fri Jan 09, 2004 9:11 am
Location: Seoul

Post by MrBishi »

I don't think I've ever seen a thin wall stainless exh manifold NOT crack eventually. Doesn't matter what brand.
To me - thick wall or nothing - bugger the weight penalty.
Post Reply

Who is online

Users browsing this forum: No registered users and 54 guests