The Nissabishi Conquest
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
The Nissabishi Conquest
Hi all.
By now most of you know that I've bought Starion4me's, (Jason's) Widebody Staz.
This is just to show those of you who are interested, what's been happening with the car...
1. I've fixed this...
This was several decent cracks in the exhaust manifold, as well as a nice BIG hole.
2. I've replaced these...
With these...
Race seats just aren't the thing to get in and out of for daily driving, so they've found a new home in my JA.
The replacement seats were originally cracked and torn grey leather from a JA wreck that I had. I had them re-upholstered, and the headrest and backs dyed. The driver's seat has also been specifically remade so that you sit lower in it.
3. As this car will become a daily driver, some sound deadening was needed...
There was nothing to absorb the sound or reflect the heat here before, so I added some deadening, and mounted the stock JD/GSR-V heatshield on top to reduce noise and vibration.
There was also nothing against the firewall, so some deadening was required here too...
I may add some thicker stuff here still because it's still a bit too noisy.
4. The original rear muffler seen here...
wasn't really making the right noise, and upon removal, the cause was discovered...
So I replaced it with this...
Which sounds better, doesn't look like you're dragging around a water storage tank, and flows just as well.
The exhaust also had some movement underneath the car due to some of the mounts being broken, so that was corrected. It no longer scrapes on every speed bump encountered!
:)[
By now most of you know that I've bought Starion4me's, (Jason's) Widebody Staz.
This is just to show those of you who are interested, what's been happening with the car...
1. I've fixed this...
This was several decent cracks in the exhaust manifold, as well as a nice BIG hole.
2. I've replaced these...
With these...
Race seats just aren't the thing to get in and out of for daily driving, so they've found a new home in my JA.
The replacement seats were originally cracked and torn grey leather from a JA wreck that I had. I had them re-upholstered, and the headrest and backs dyed. The driver's seat has also been specifically remade so that you sit lower in it.
3. As this car will become a daily driver, some sound deadening was needed...
There was nothing to absorb the sound or reflect the heat here before, so I added some deadening, and mounted the stock JD/GSR-V heatshield on top to reduce noise and vibration.
There was also nothing against the firewall, so some deadening was required here too...
I may add some thicker stuff here still because it's still a bit too noisy.
4. The original rear muffler seen here...
wasn't really making the right noise, and upon removal, the cause was discovered...
So I replaced it with this...
Which sounds better, doesn't look like you're dragging around a water storage tank, and flows just as well.
The exhaust also had some movement underneath the car due to some of the mounts being broken, so that was corrected. It no longer scrapes on every speed bump encountered!
:)[
lol, those taillights are off my parts car i believe!
i heard about what happened to it during transport.. really sad to hear about it.. but i'm sure you'll get it sorted soon enough.
congrats on the buy!!
i heard about what happened to it during transport.. really sad to hear about it.. but i'm sure you'll get it sorted soon enough.
congrats on the buy!!
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
say, since you are replacing the front seat to a reclineable one, will you (be able to) re-register it as a 4/5 seater or still remain as a 2 seater?
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
What happened during transport?thrash wrote:lol, those taillights are off my parts car i believe!
i heard about what happened to it during transport.. really sad to hear about it.. but i'm sure you'll get it sorted soon enough.
congrats on the buy!!
the exhaust mani cracks..?
quest wrote:don't try explaining that to her tho..... just leave. lolWANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
It was cracked when I first drove it in Sydney, but it got worse very quickly when I got it.thrash wrote:the exhaust mani cracks..?
I suspect that it probably had a bump or 2 whilst in transit, and a couple of of drives was enough to turn it to shit.
It's fixed now anyway, so no more dramas from that at least...
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
GRRRR!
Exhaust turbo manifold has cracked again! In a different spot though this time!
I'm going to replace it, but I'll need to find something similar in style, but much better quality.
Apparently the current manifold is a 'Trust' brand one.
All I can say is it's garbage!
Exhaust turbo manifold has cracked again! In a different spot though this time!
I'm going to replace it, but I'll need to find something similar in style, but much better quality.
Apparently the current manifold is a 'Trust' brand one.
All I can say is it's garbage!
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
there's a dude selling a hks GT2530 and a 6boost SR manifold on secretdrift at the moment.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Who is online
Users browsing this forum: No registered users and 5 guests