Newbie needs help getting more power.

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Newbie needs help getting more power.

Post by Ashgan »

Hey guys,

Let's say you have a stock JA starion except that you've worked over the suspension, what's the first point of business when it comes to getting more power?

-Ash
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

assuming your engine is totally stock that would depend on your budget and your ultimate power goal. you could start with exhaust and intercooler with a boost increase before deciding where to go from there
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Re: Newbie needs help getting more power.

Post by OLD FART »

Ashgan wrote:Hey guys,

Let's say you have a stock JA starion except that you've worked over the suspension, what's the first point of business when it comes to getting more power?

-Ash
Buy my head and mpi manifold if you want serious power :D :D
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

3 inch exhaust, intercooler and an electronic boost controller set to 13psi...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Station
I like starions more
Posts: 160
Joined: Sun Jun 29, 2008 9:40 am
Location: The Wirral, UK

Post by Station »

I've read the intercooler is the first place to start - it allegedly 'unleashes' double figures in bhp.
1987 Mitsubishi Starion 2.0 Turbo RHD with 88 - 90 engine (?), manual gearbox (MAP Sensor'd).
LSD, Intercooler, ABS, leather interior, air con
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

redzone wrote:3 inch exhaust, intercooler and an electronic boost controller set to 13psi...
:D AGREED! + MPI!
SR20 powered starion what have I done..... :P
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

I wouldn't say intercooler unleashes more power. It really just makes it more reliable for you to run higher boost levels which will give you more power.
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Post by Ashgan »

How hard is it to setup MPI yourself though? And don't you need to reprogram/replace the ECU if you do that?

Keep in mind that while i'm not a complete dunce when it comes to mechanics, i'm very new to the game. How much are all of these options likely to set me back, and to what extent could you have some of these options done in a shop for you?

Also, are you seriously selling your head + mpi OLD FART?

-Ash
WidebodyWoody
Woodwide
Posts: 3133
Joined: Thu Jan 08, 2004 6:24 pm
Location: Gold Coast
Contact:

Post by WidebodyWoody »

MPI you will need an aftermarket ecu. You can tune them yourself but its safer to get a fully trained professional to do it for you.

And yes he is selling his head and MPI setup. It is a great deal.
Ashgan
I like starions more
Posts: 158
Joined: Thu Jan 24, 2008 3:01 pm
Location: West Beach, Adelaide, SA

Post by Ashgan »

I can't find it in the buy/sell area. How much is the asking price? How much fuck around does setting it up require roughly? How much is an aftermarket ECU likely to set me back + prof. tuning?

Sorry for blasting the questions out like this :P

-Ash
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

it depends on if you can install the computer yourself, what computer you are using and the tuner.

Also before you go mpi consider how much power you want and the condition of your engine. From there you can work out if its better to go mpi or twin cam.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
JD_Stazza_Brendan
almost postwhore
Posts: 1131
Joined: Tue Jan 25, 2005 10:46 pm
Location: Mackay, QLD, Australia

Post by JD_Stazza_Brendan »

enjoy the car as it is now and SAVE SAVE SAVE.

save enough to rebuild the motor. doesnt have to be an all out rebuild, just a decent freshen up.
Buy a MPI setup
Decent head (not absolutly needed)
Intercooler
Ecu
Exhaust

Do it all in 1 hit and it should be a nice car to drive around.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.

Yes i have too many toys.
SOHC POWER
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

there is a few people on here selling full engines with MPI setups with everything to just bolt in and go!
SR20 powered starion what have I done..... :P
Post Reply

Who is online

Users browsing this forum: No registered users and 18 guests