Newbie needs help getting more power.
-
- I like starions more
- Posts: 158
- Joined: Thu Jan 24, 2008 3:01 pm
- Location: West Beach, Adelaide, SA
Newbie needs help getting more power.
Hey guys,
Let's say you have a stock JA starion except that you've worked over the suspension, what's the first point of business when it comes to getting more power?
-Ash
Let's say you have a stock JA starion except that you've worked over the suspension, what's the first point of business when it comes to getting more power?
-Ash
Re: Newbie needs help getting more power.
Buy my head and mpi manifold if you want serious power :D :DAshgan wrote:Hey guys,
Let's say you have a stock JA starion except that you've worked over the suspension, what's the first point of business when it comes to getting more power?
-Ash
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
3 inch exhaust, intercooler and an electronic boost controller set to 13psi...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
-
- I like starions more
- Posts: 158
- Joined: Thu Jan 24, 2008 3:01 pm
- Location: West Beach, Adelaide, SA
How hard is it to setup MPI yourself though? And don't you need to reprogram/replace the ECU if you do that?
Keep in mind that while i'm not a complete dunce when it comes to mechanics, i'm very new to the game. How much are all of these options likely to set me back, and to what extent could you have some of these options done in a shop for you?
Also, are you seriously selling your head + mpi OLD FART?
-Ash
Keep in mind that while i'm not a complete dunce when it comes to mechanics, i'm very new to the game. How much are all of these options likely to set me back, and to what extent could you have some of these options done in a shop for you?
Also, are you seriously selling your head + mpi OLD FART?
-Ash
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
enjoy the car as it is now and SAVE SAVE SAVE.
save enough to rebuild the motor. doesnt have to be an all out rebuild, just a decent freshen up.
Buy a MPI setup
Decent head (not absolutly needed)
Intercooler
Ecu
Exhaust
Do it all in 1 hit and it should be a nice car to drive around.
save enough to rebuild the motor. doesnt have to be an all out rebuild, just a decent freshen up.
Buy a MPI setup
Decent head (not absolutly needed)
Intercooler
Ecu
Exhaust
Do it all in 1 hit and it should be a nice car to drive around.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
Who is online
Users browsing this forum: No registered users and 1 guest