Ash's Gold SOHC Staz 196kw atw dyno sheets included

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
driftz
****WELCOME TO AUSTARION!****
Posts: 1
Joined: Tue May 29, 2007 10:18 pm
Location: Canberra

Ash's Gold SOHC Staz 196kw atw dyno sheets included

Post by driftz »

Finally got some decent power out of her ....
Image
Image
Image
Mods so far ....................

Forged CP pistons .40 thou oversize, Stainless steel head gasket (Thanks again Redzone for sourcing these & all your help along the way :)
Image
reground crank, new bearings, oil seals, 4 puck ceramic clutch
KKR-430 turbo (running 18-19psi) - custom exhaust manifold (ceramic coated), external gate (ultragate 38mm) screamer pipe, 3 inch exhaust straight through, turbo blanket (needed to keep heat off brake reservoir)
New head & valves, double valve springs, stage 2 camtech cam, adjustable cam gear, ARP head bolts (with 10mm spacers)
L300 distributor & manifold, modified to face front of car & enlarged, VN V6 throttle body, 650cc injectors, Microtech LT10s (fuel & spark), Eboost, MSD ignition amplifier (wasted spark) & MSD coil
450x300x100 intercooler Image

Drives well above 3000rpm a little sluggish down thanks to the cam but you learn to drive a little differently & avoid boost in the rain !!

Will post more pics of engine bay when I remember

12 inch square kicker 750w rms sub in custom fibreglass box (my first fibreglass attempt not real good looking but sounds good)
Image
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

Nice work ash, good to see pics of her finally :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

Well done... and 7th on the list :D

http://forums.austarion.com/viewtopic.php?t=10584
1985 JB Starion #157
4gpwr
I love starions
Posts: 350
Joined: Tue May 20, 2008 5:15 pm
Location: sth east melb

cool

Post by 4gpwr »

Cool show us the eng
4Gs Rule
User avatar
beetleman
I like starions
Posts: 121
Joined: Tue Feb 28, 2006 12:34 am
Location: Zagreb, Croatia
Contact:

Post by beetleman »

Very nice :) lots of power :)
Junkers
Formerly StazzyBabyYeah
Posts: 2338
Joined: Mon Nov 08, 2004 3:16 pm
Location: Christchurch

Post by Junkers »

Hey nice to see someone follow the SOHC route. What would you compare a KKR 430 to out of the mitsi or garrett range of turbos?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

they come on power HARD at about 3000 rpm on a sohc starion, and are rated to produce 430hp. they are a plain bearing (though 360 degree thrust) type turbo. basically they're a brand new T3 T4 hybrid....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests