Starion running horrible

All technical questions and answers regarding starions, being modifications to maintenance.
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

Starion running horrible

Post by zegga »

Hey all.
My car has recently been running badly, if i put my foot down itll start spluttering and running horrible. It will run if im gentle and even get on full boost. But sometimes itll want to cut out. The other day she started to only run on two cylinders, 2 and 3 plugs were black with fuel. Any ideas whats going on? If anyone in Adelaide has a working map sensor i can test in here that would be much appreciated.
Station
I like starions more
Posts: 160
Joined: Sun Jun 29, 2008 9:40 am
Location: The Wirral, UK

Post by Station »

Welcome to the nightmarish world of not-working Starions. :(

Sounds like a few things, have you changed your plugs/leads, etc?
1987 Mitsubishi Starion 2.0 Turbo RHD with 88 - 90 engine (?), manual gearbox (MAP Sensor'd).
LSD, Intercooler, ABS, leather interior, air con
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

yep

Post by zegga »

Yer changed plugs and all plug leads. they were pretty new anyway.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

is your car a JA JB or JD?

JA are notorious for leaking fuel injectors.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

Try checking your water temperature sensor. If faulty, or wire fallen off, ECU will see this as cold water and make the motor run rich & foul the plugs.
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

Thanks

Post by zegga »

Yes its a JA Australian spec 2.0 which i thought only had one (or two) fuel injector? Its strange its working on the outer cylinders though. Do you know if any injectors from any other make of car would work?

Where would i find the temp sensor?
Ill post a pic of my engine bay.
Last edited by zegga on Wed Oct 08, 2008 11:12 am, edited 2 times in total.
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

Post by zegga »

Heres the engine bay if youre interested. The chap before me added all these bypass hoses across the place. One to the waste gate, if you can see the little valve with the U and O marked.
Image

heres a more complete view.
http://www.fr33z3.net/starions/Apr06/101_0290_copy1.jpg

And from left and right.
http://www.fr33z3.net/starions/Apr06/101_0293_copy1.jpg
http://www.fr33z3.net/starions/Apr06/101_0294_copy1.jpg
hope that all worked.
User avatar
jwebb2876
I've been here before
Posts: 248
Joined: Wed Sep 03, 2008 10:53 am
Location: parkes

Post by jwebb2876 »

apparently VR4 and purple top RX7 injectors fit although someone would need to confirm this as im not sure...........
cheers
Josh
"Speed isn't everything; you gotta look cool on the touge too."- Keiichi Tsuchiya
gj2600.wordpress.com
TOMSUN
Group buy King
Posts: 2391
Joined: Fri Sep 10, 2004 10:24 am
Location: Sydney (Liverpool)

Post by TOMSUN »

Cracked rings in cylinders 2 & 3 ? And oiling up the plugs?

Does it blow smoke at anytime??
1985 JB Starion #157
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

Post by zegga »

yep. now it does. bit of white smoke but if you rev it it goes black.
really should have mentioned this before.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

jwebb2876 wrote:apparently VR4 and purple top RX7 injectors fit although someone would need to confirm this as im not sure...........
cheers
Josh
wrong...


zegga i'd be doing a compression test first, then clean all electrical connections on the sensors etc. the coolant temp sensor is located near the thermostat housing, it is the 2 wire one (temp guage is the 1 wire)

how mechanically minded are you? you can remove the injector hat from the throttle body to check the injectors for leaks, but i'd only do that if you know what you're doing. if you undo the wrong screws and disturb the wrong parts you can create more problems as the injectors typically leak out the side of them where the wires go into the injectors themselves (not the hat necessarily)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
zegga
[P] Plates
Posts: 37
Joined: Tue Oct 07, 2008 2:26 pm
Location: JAdelaide

Post by zegga »

Ill have a look. I tried doing a compression test . got good compression on the 1 and 4. but with 2 and 3 the gauge wouldnt give a reading.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

why wouldnt the guage give a reading? that might be your problem. might have blown a head gasket between cylinders.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
TD05
it's probably their firewall
Posts: 1404
Joined: Sun Jan 11, 2004 11:23 am
Location: Brisbane

Post by TD05 »

Injectors, and or seals, My JB used to leak through the "o" rings over the injector into the plenum
Kiss my st AZZ -
Starions rule the sports car world
GTI-R's are best in the wet..
Who needs Rock & Roll when there's JAZZ, Honda RULEZ
User avatar
SpidersWeb
postwhore!
Posts: 1984
Joined: Wed Jan 28, 2004 2:29 am
Location: Wellington, NZ

Post by SpidersWeb »

My 300ZX did the same thing when it had a blown head gasket.
No compression on 2 & 3 suggests the same.

Check your water and oil, see if they've been mixing at all.
1997 Mitsubishi Lancer Evolution IV 4G63BT
1996 Nissan Maxima VQ30DE (for sale, suit someone who likes the feel of boats when driving)
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests