Fitting an oil temp probe
- muttis3lv6
- I've been here before
- Posts: 224
- Joined: Mon Nov 19, 2007 5:51 pm
- Location: Brisbane QLD
Fitting an oil temp probe
with out ANY smart ass remarks
Where is the best place for me to fit my oil temp probe
remember no smart remarks!
Where is the best place for me to fit my oil temp probe
remember no smart remarks!
JA Street track monster
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
- muttis3lv6
- I've been here before
- Posts: 224
- Joined: Mon Nov 19, 2007 5:51 pm
- Location: Brisbane QLD
not keen to use the sump plug as i recon after 30 000 km worth or servicing i will break the wire.
was thinking about welding a nut to the slump and tapping that?
was thinking about welding a nut to the slump and tapping that?
JA Street track monster
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
- muttis3lv6
- I've been here before
- Posts: 224
- Joined: Mon Nov 19, 2007 5:51 pm
- Location: Brisbane QLD
yes if i could have got an eletronic sensor in the style i liked, since mine is a mechanical its a tube running to the guage and if that breaks......
JA Street track monster
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
-
- Big Dorifto
- Posts: 79
- Joined: Sun Sep 11, 2005 2:41 pm
- Location: Mesquite(Dallas), Texas USA
- Contact:
Get one of these adapters, I am using one on my car, has been on there for about 4 years.
I just clicked on the first one, check them all out!
http://cgi.ebay.com/ebaymotors/OIL-FILT ... enameZWDVW
I just clicked on the first one, check them all out!
http://cgi.ebay.com/ebaymotors/OIL-FILT ... enameZWDVW
- muttis3lv6
- I've been here before
- Posts: 224
- Joined: Mon Nov 19, 2007 5:51 pm
- Location: Brisbane QLD
Blofly
since the guage has oil temp written on the front i am pretty sure its not a oil pressure guage, i might be wrong but dont think so :)
since the guage has oil temp written on the front i am pretty sure its not a oil pressure guage, i might be wrong but dont think so :)
JA Street track monster
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
- muttis3lv6
- I've been here before
- Posts: 224
- Joined: Mon Nov 19, 2007 5:51 pm
- Location: Brisbane QLD
Update both water and oil gauges fitted.
Under the oil filter there is a 10 odd mm alan key bolt. Buy an adapter for $8 that makes the senor fit. The same part will make the water temp senor fit in the bottom of the radiator.
No dilling, tapping or troubles!
Under the oil filter there is a 10 odd mm alan key bolt. Buy an adapter for $8 that makes the senor fit. The same part will make the water temp senor fit in the bottom of the radiator.
No dilling, tapping or troubles!
JA Street track monster
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
MPI with Wold3d
Frankinstine turbo
water injection and bloody big inter-cooler
6 point roll cage with 4 point harness
OMG fiberglass
Megga weight reduction weight TBC
5 stud conversion with HUGE rotors
Cute little 12 inch sub with 700 Watt amp
Who is online
Users browsing this forum: No registered users and 23 guests