$600 JB in perth!!!!!!!!
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
The problem isn't whether it's saveable or not. The problem is that WA has such a small market for Starions. So if you were to buy it and fix it up, and then subsequently sell it, selling it to someone in WA would take a while. The alternative is to of course sell it to someone over in the east, but there seems to be MANY more Starions there, than there are here. Just look at the member list, and where those members are located. On the East side you've got MUCH more choice, and you'd probably find just as good an example over there for the same money less transport costs.
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
tis a shame, be good if someone there had a shitty JB they could raid the required parts from to get her back in action.. its a maroon interior car isnt it. and most of the interior is gone? is it a D60 car?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
Reading the guys description, it mainly has a black interior....redzone wrote:tis a shame, be good if someone there had a shitty JB they could raid the required parts from to get her back in action.. its a maroon interior car isnt it. and most of the interior is gone? is it a D60 car?
Anyone who's seen Hoony's car in the flesh will vouch it really stands out!
This car would look awesome if restored...which appears to be the replica of Hoony's car! Gold exterior with black interior.
I think most of the parts could come from the ebay/US to finish off and engine stuff locally!!
:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
-
- nearly postwhore
- Posts: 1589
- Joined: Sat Jan 10, 2004 12:28 pm
- Location: Perth (Morley), WA
- Contact:
...
Black interior is the bomb! I got black in my GSR-V, and I prior to that I had always wanted a black interior. Lucky me I guess.
Well guys, you're welcome to it. I've got enough Starions to keep me going, not to mention a certain JB that I'd like to finish soon. I don't know how soon that might be though :?
Well guys, you're welcome to it. I've got enough Starions to keep me going, not to mention a certain JB that I'd like to finish soon. I don't know how soon that might be though :?
Last edited by NachoMan on Fri Jan 25, 2008 4:17 am, edited 1 time in total.
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
if it was still there after i get rid of these 2 JB's i'd seriously consider it, just to save the thing....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
it'd cost well over a grand to get a car from there to here eh? anyone ever done it?? i have access to a complete JD drivetrain (yes red rocker cover motor etc) and most of the bits to get it up and running again. fkn hell what am i doing lol
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
Its a JD.
They are totally different car to drive from any other Starion. (especially with D60 option)
They are about as rare as rocking horse shit.
You need any more reasons to do it :P
They are totally different car to drive from any other Starion. (especially with D60 option)
They are about as rare as rocking horse shit.
You need any more reasons to do it :P
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-
- BATHURST LEGEND 07
- Posts: 948
- Joined: Sun Feb 18, 2007 4:46 pm
- Location: Brisbane
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
if i sold that white JB in time i might get it.....
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Highest I have found is 51. Yes, the compliance plate will be on the back behind the seats. Someone please get it for me.
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
Who is online
Users browsing this forum: No registered users and 50 guests