starion wheel offset etc

All technical questions and answers regarding starions, being modifications to maintenance.
User avatar
grothie1978
I love starions
Posts: 397
Joined: Thu Jun 22, 2006 9:23 am
Location: PMQ, NSW

starion wheel offset etc

Post by grothie1978 »

heya all
must i say first off merry xmas and drink on :beer

now...
whats the stud pattern and offset to suit starion and also what offset can also be used comfortably
--Many Thanks--
REPREZENTIN'
Image
http://www.freeyabb.com/forums/unstable.html <---REGISTER HERE
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

it's 4 stud...you probably guessed that...but I think the offset is +20.
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
benny
I love starions
Posts: 464
Joined: Mon Dec 04, 2006 8:53 pm
Location: gladstone

Post by benny »

4 x 114.3... offset as above
Image
User avatar
grothie1978
I love starions
Posts: 397
Joined: Thu Jun 22, 2006 9:23 am
Location: PMQ, NSW

Post by grothie1978 »

so +42 no good?
what can i use safely?
just that seen a few cheap sets of rims and need to no what offset can be safe, like between +10 and +40
i need a range aspect
thanks heaps for ya help guys
--Many Thanks--
REPREZENTIN'
Image
http://www.freeyabb.com/forums/unstable.html <---REGISTER HERE
benny
I love starions
Posts: 464
Joined: Mon Dec 04, 2006 8:53 pm
Location: gladstone

Post by benny »

i tried some +35 wheels but the balance weights were hitting the strut, the +30 ( i think they are ) fit fine like the stockos though a little further in than i'd like
Image
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

DO NOT USE A NARROWER OFFSET THAN STANDARD AS U WILL NOT BE COVERED BY INSURANCE!

and that includes 3rd party injury thats part of ur rego..

its a major no no according to traffic authorities in every state, as it alters (for the worse) the handling characteristics of the car, as it alters scrub radius etc... it also looks like absolute SHITE having narrow offset wheels marooned inside those deep arches.

Starion standard offset is +18MM not +20MM. u can run anywhere between 18mm and 10mm easily if u keep width to 9 inches at the rear and 8 inches at the front.

there really is no excuse for running the wrong wheels these days, we're comparitively spoiled for choice compared to a few short years ago..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
grothie1978
I love starions
Posts: 397
Joined: Thu Jun 22, 2006 9:23 am
Location: PMQ, NSW

Post by grothie1978 »

thanks heaps guys
stopped me from wasting money on wrong rims

again thanx
--Many Thanks--
REPREZENTIN'
Image
http://www.freeyabb.com/forums/unstable.html <---REGISTER HERE
endless
[L] Plates
Posts: 11
Joined: Sun Sep 03, 2006 4:28 pm
Location: melb

Post by endless »

i went to a wheel place and was told there are two offsets one is 18+ for early starions and then theres 20+ for later starions
just my two cents worth
81 scorp 17x7 and abit more
User avatar
DD Phil
Enthusiast
Posts: 509
Joined: Wed Feb 18, 2004 8:17 am
Contact:

Post by DD Phil »

I've got 19x10s at the rear +12 and 19x8.5s up front +12.

Image

Needed a little lip and a pump, but I'm going really low.....

Phil
Image
Purple JA, full cage, 6G72TT, collecting dust
White JA, 19x10s, GT30, Alcons, DMS, Crower 2.4, Hypertune intake, M800.....
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

endless wrote:i went to a wheel place and was told there are two offsets one is 18+ for early starions and then theres 20+ for later starions
just my two cents worth
nah that's definitely incorrect,

JA rims are 14X6 +18

JB & JD rims are 15X6.5 +18
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
endless
[L] Plates
Posts: 11
Joined: Sun Sep 03, 2006 4:28 pm
Location: melb

Post by endless »

i am just going by what the guy said and he got that referance from his little book behind the desk at which that time he also told me that if i could be stuff bmw have rims in 20+ offset also but, it on the M 5 (hot looking wheels ) but again a stud conv is needed
he sell them so dont see why he would lie
81 scorp 17x7 and abit more
benny
I love starions
Posts: 464
Joined: Mon Dec 04, 2006 8:53 pm
Location: gladstone

Post by benny »

endless wrote: he sell them so dont see why he would lie
i think you gave the #1 reason why he would lie.. lol
Image
nzgsr
Mine is bigger than yours
Posts: 256
Joined: Wed May 31, 2006 5:16 pm
Location: auckland nz

Post by nzgsr »

spacer plates they r illesal over ther though
endless
[L] Plates
Posts: 11
Joined: Sun Sep 03, 2006 4:28 pm
Location: melb

Post by endless »

but i wasnt buying he was telling me what else is in 20+ offset
:)
81 scorp 17x7 and abit more
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

JA, JB, JD are all +18 offset.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests