starion wheel offset etc
- grothie1978
- I love starions
- Posts: 397
- Joined: Thu Jun 22, 2006 9:23 am
- Location: PMQ, NSW
starion wheel offset etc
heya all
must i say first off merry xmas and drink on :beer
now...
whats the stud pattern and offset to suit starion and also what offset can also be used comfortably
must i say first off merry xmas and drink on :beer
now...
whats the stud pattern and offset to suit starion and also what offset can also be used comfortably
- madeofmilo
- Enthusiast
- Posts: 578
- Joined: Fri May 21, 2004 5:53 pm
- Location: Melb - East
- grothie1978
- I love starions
- Posts: 397
- Joined: Thu Jun 22, 2006 9:23 am
- Location: PMQ, NSW
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
DO NOT USE A NARROWER OFFSET THAN STANDARD AS U WILL NOT BE COVERED BY INSURANCE!
and that includes 3rd party injury thats part of ur rego..
its a major no no according to traffic authorities in every state, as it alters (for the worse) the handling characteristics of the car, as it alters scrub radius etc... it also looks like absolute SHITE having narrow offset wheels marooned inside those deep arches.
Starion standard offset is +18MM not +20MM. u can run anywhere between 18mm and 10mm easily if u keep width to 9 inches at the rear and 8 inches at the front.
there really is no excuse for running the wrong wheels these days, we're comparitively spoiled for choice compared to a few short years ago..
and that includes 3rd party injury thats part of ur rego..
its a major no no according to traffic authorities in every state, as it alters (for the worse) the handling characteristics of the car, as it alters scrub radius etc... it also looks like absolute SHITE having narrow offset wheels marooned inside those deep arches.
Starion standard offset is +18MM not +20MM. u can run anywhere between 18mm and 10mm easily if u keep width to 9 inches at the rear and 8 inches at the front.
there really is no excuse for running the wrong wheels these days, we're comparitively spoiled for choice compared to a few short years ago..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- grothie1978
- I love starions
- Posts: 397
- Joined: Thu Jun 22, 2006 9:23 am
- Location: PMQ, NSW
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
nah that's definitely incorrect,endless wrote:i went to a wheel place and was told there are two offsets one is 18+ for early starions and then theres 20+ for later starions
just my two cents worth
JA rims are 14X6 +18
JB & JD rims are 15X6.5 +18
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
i am just going by what the guy said and he got that referance from his little book behind the desk at which that time he also told me that if i could be stuff bmw have rims in 20+ offset also but, it on the M 5 (hot looking wheels ) but again a stud conv is needed
he sell them so dont see why he would lie
he sell them so dont see why he would lie
81 scorp 17x7 and abit more
- Cookiemonster
- Mother Goose
- Posts: 3177
- Joined: Thu Jan 08, 2004 4:33 pm
- Location: Sydney
Who is online
Users browsing this forum: No registered users and 22 guests