how much torque has your 4g63 single cam got
- davidbek95
- I've been here before
- Posts: 249
- Joined: Thu Jan 08, 2004 7:59 pm
- Location: beautiful QLD (mackay)
how much torque has your 4g63 single cam got
how much torque has your starion got with the single cam 4g63 got modified or standard motor if modified around 290 to 310hp got.
-
- Big Dorifto
- Posts: 70
- Joined: Sun Jan 09, 2005 1:24 am
- Location: The Netherlands
- davidbek95
- I've been here before
- Posts: 249
- Joined: Thu Jan 08, 2004 7:59 pm
- Location: beautiful QLD (mackay)
impressive
very impressive for standard fuel injection set up
regards david
regards david
-
- Big Dorifto
- Posts: 70
- Joined: Sun Jan 09, 2005 1:24 am
- Location: The Netherlands
No, I just turned my ECI. We didn't believe that it would change the way the fuel is injected into the head. We didn't noticed any change the way the car drove exept for the HP of course! :D I've been driving for 5 years with this setup.Chryzla wrote:2000_turbo, when moving the intake manifold around like you did... did you put the injectors back to the standard position? would have thought the fuel would be gravitating the wrong direction?
Gr,
Martijn.
-
- nearly postwhore
- Posts: 1446
- Joined: Sun Jun 19, 2005 7:27 pm
- Location: Sunny Brisbane Australia!
-
- Big Dorifto
- Posts: 70
- Joined: Sun Jan 09, 2005 1:24 am
- Location: The Netherlands
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
my orange car, 276hp at the wheels and 1200lbs of motive force :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
-
- Big Dorifto
- Posts: 70
- Joined: Sun Jan 09, 2005 1:24 am
- Location: The Netherlands
Sorry but, I haven't got specs for the adaptor plate. There is one thing that I can do, that is post a clear picture of the plate.benny wrote:sorry to continue the hijack but
specs for adaptor plate and a brief how to ( for re-routing the bits and pieces)
thx :D
I'll post some pictures when I've got the time.
Gr,
Martijn.
Toys have you done the math yet ??????????????????????????????OLD FART wrote:My Dyno Dynamics power run shows 1540 lbs of tractive effort. Can someone do the math & convert it to kn
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
Who is online
Users browsing this forum: No registered users and 48 guests