I have the release on the inside as well on my series 1Chryzla wrote:JA
-Series 1 JA have radio antenna on roof above driver
-Series 1 JA have lock on fuel filler door (no release inside the car)
hmm I have antenna on roof, and release beside drivers seat?
JA, JB, JD
_
_________________
_________________
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
nice work brendan, but i need to add/change a few things:
JA
-125kw 2.0L 4G63 SOHC non-intercooled Leaded Fuel
-MHI TC06 oil-cooled turbo
-Type 1 Throttle body injection
-Vented and scooped bonnet
-3.55:1 open diff
-Leather front seats vinyl rear seats, Series 1 JA had single colour interior, Series 2 had two tone interior, darker colour from waistline up (seats lighter colour)
-Series 1 JA had black controls on seats, Series 2 were matched to interior colour
-Manual mirrors
-Power windows (buttons on centre console, no lock button)
-Series 1 JA have manual radio antenna on roof above driver
-Series 2 JA have power radio antenna on rear passenger quarter above fuel filler like later starions
-JA have lock on fuel filler door
-JA have release for fuel door beside driver seat
-14 inch mags
-Twin B-pillar on each side. vents mounted flush
-metal front air dam mounted close to front wheels
-Hatch mounted spoiler made from foam and rubber
JB
-125kw 2.0L 4G63 SOHC non-intercooled Leaded Fuel
-MHI TC06 oil-cooled and water-cooled turbo
-Type 2 Throttle body injection
-Flat bonnet
-3.55:1 open diff or optional 3.55:1 LSD (most seem LSD)
-Different steering wheel to JA
-Velour interior
-Power mirrors
-Power windows, controls on door trims like JD, has lock button
-Power radio antenna on rear passenger quarter above fuel filler
-JB have release for fuel door beside driver seat, no lock on flap
-15 inch mags (same as JD)
-Single B-pillar vent on each side angled rearward and come out of the car a bit
-Metal front air dam mounted close to front wheels
-Hatch mounted spoiler made from foam and rubber
JD
-110kw 2.0L 4G63 SOHC intercooled ULP
-MHI TC05 oil-cooled and water-cooled turbo
-Cat converter in exhaust
-Type 2 Throttle body injection
-Flat bonnet
-3.9:1 LSD (all factory LSD)
-Velour interior
-Different steering wheel to JA
-Power mirrors (buttons on centre console)
-6 Speaker stereo (2 in dash, 2 in doors, 2 in rear)
-Power windows with buttons placed on each door (lock button on drivers side)
-Radio antenna on rear passanger quarter above fuel filler
-JD have release for fuel door beside driver seat, no lock on flap
-15 inch mags (same as JB)
-Single B-pillar vent on each side angled rearward and come out of the car a bit
-Large urethane airdam that houses intercooler, small ducts on each side.
-3 piece rear wings (widebody style) that got on hatch and each quarter
there u go!
JA
-125kw 2.0L 4G63 SOHC non-intercooled Leaded Fuel
-MHI TC06 oil-cooled turbo
-Type 1 Throttle body injection
-Vented and scooped bonnet
-3.55:1 open diff
-Leather front seats vinyl rear seats, Series 1 JA had single colour interior, Series 2 had two tone interior, darker colour from waistline up (seats lighter colour)
-Series 1 JA had black controls on seats, Series 2 were matched to interior colour
-Manual mirrors
-Power windows (buttons on centre console, no lock button)
-Series 1 JA have manual radio antenna on roof above driver
-Series 2 JA have power radio antenna on rear passenger quarter above fuel filler like later starions
-JA have lock on fuel filler door
-JA have release for fuel door beside driver seat
-14 inch mags
-Twin B-pillar on each side. vents mounted flush
-metal front air dam mounted close to front wheels
-Hatch mounted spoiler made from foam and rubber
JB
-125kw 2.0L 4G63 SOHC non-intercooled Leaded Fuel
-MHI TC06 oil-cooled and water-cooled turbo
-Type 2 Throttle body injection
-Flat bonnet
-3.55:1 open diff or optional 3.55:1 LSD (most seem LSD)
-Different steering wheel to JA
-Velour interior
-Power mirrors
-Power windows, controls on door trims like JD, has lock button
-Power radio antenna on rear passenger quarter above fuel filler
-JB have release for fuel door beside driver seat, no lock on flap
-15 inch mags (same as JD)
-Single B-pillar vent on each side angled rearward and come out of the car a bit
-Metal front air dam mounted close to front wheels
-Hatch mounted spoiler made from foam and rubber
JD
-110kw 2.0L 4G63 SOHC intercooled ULP
-MHI TC05 oil-cooled and water-cooled turbo
-Cat converter in exhaust
-Type 2 Throttle body injection
-Flat bonnet
-3.9:1 LSD (all factory LSD)
-Velour interior
-Different steering wheel to JA
-Power mirrors (buttons on centre console)
-6 Speaker stereo (2 in dash, 2 in doors, 2 in rear)
-Power windows with buttons placed on each door (lock button on drivers side)
-Radio antenna on rear passanger quarter above fuel filler
-JD have release for fuel door beside driver seat, no lock on flap
-15 inch mags (same as JB)
-Single B-pillar vent on each side angled rearward and come out of the car a bit
-Large urethane airdam that houses intercooler, small ducts on each side.
-3 piece rear wings (widebody style) that got on hatch and each quarter
there u go!
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Were Australian Starions fully manafactured in Oz or were they just assembled there?
The Jap starions obviously don't conform to the JA, JB, JD scheme above. I have a GSRIII which seems to be a mish mash of JA/JB bits. ie velour interior, no lock on fuel filler door, JB wheels, JA front bumper, Type 1 throttle body, LSD bla bla bla. Most of it is standard. Those crazy japs.
The Jap starions obviously don't conform to the JA, JB, JD scheme above. I have a GSRIII which seems to be a mish mash of JA/JB bits. ie velour interior, no lock on fuel filler door, JB wheels, JA front bumper, Type 1 throttle body, LSD bla bla bla. Most of it is standard. Those crazy japs.
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
- Glen GSR III
- guess its me thats broke
- Posts: 581
- Joined: Wed Jan 11, 2006 7:34 pm
- Location: Toowoomba, Queensland
yeah, ive got a gsr iii as well. their bitzas alrite :)bigd wrote:. I have a GSRIII which seems to be a mish mash of JA/JB bits. ie velour interior, no lock on fuel filler door, JB wheels, JA front bumper, Type 1 throttle body, LSD bla bla bla. Most of it is standard. Those crazy japs.
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
-
- Enthusiast
- Posts: 605
- Joined: Thu Apr 06, 2006 2:21 pm
- Location: Christchurch,New Zealand
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
preeeeeeeeeety much, cept for the US LE versions that came out after the widey was released :beerjrod82 wrote:Nup, they came with the JB 15" rims.. weird hey. I'm pretty sure after 1985 everywhere except oz got 5 stud.kiwieurospec wrote:So not even a JD five stud?
the "starion & conquest performance portfolio" book is an excellent source of info on what was released where, if u do a search onthis forum u should be able to come up with the ISBN number for it :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
absolute awesome book that one, about $30 off ebayredzone wrote:
the "starion & conquest performance portfolio" book is an excellent source of info on what was released where, if u do a search onthis forum u should be able to come up with the ISBN number for it :beer
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
94 EVO2 4g63 DOHC
i wanna go fast
-
- almost postwhore
- Posts: 1250
- Joined: Sat Feb 12, 2005 10:00 pm
- Location: Inner West, Sydney
-3.9:1 LSD (all factory LSD)....not true
For the JD, the LSD was still an option, but had the larger open diff. My ex JD numbered 45 did not come with the D 60 option!
You will find the two tone limited edition ones came with the LSD as standard in the package...
:beer
For the JD, the LSD was still an option, but had the larger open diff. My ex JD numbered 45 did not come with the D 60 option!
You will find the two tone limited edition ones came with the LSD as standard in the package...
:beer
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
-
- almost postwhore
- Posts: 1131
- Joined: Tue Jan 25, 2005 10:46 pm
- Location: Mackay, QLD, Australia
ill have to check my user manual (the little booklet u get when u buy a new car) on the JD as im sure in the Specs section it only lists the LSD as the only diff.
-JA Starion with JD bits , Forged engine, Heaps of mods (parked up)
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
-BFII XR6 Turbo Ute , Here comes 400hp for 2k :p
-77 Mazda 323 drag car. 13bt rotary project.
Yes i have too many toys.
SOHC POWER
Who is online
Users browsing this forum: No registered users and 5 guests