Quick Question From A Dumb American

A place for general discussion. Catch up with mates, post pics, or if you just want to pick on e-thugs.
Starquest86
[P] Plater austaz
Posts: 21
Joined: Fri May 26, 2006 4:18 am
Location: USA-Wisconsin

Quick Question From A Dumb American

Post by Starquest86 »

Well i dont mean to call myself a dumb american. I just hear all of you talk about JA, JC, JD starquests. Im just curious what this means and also kinda curious to what distinguishes them unless one question answers another. Thanks to whoever replies.

Garrett G$
1986 Dodge Conquest Le Turbo
1994 Ford Probe-Daily Driver

Turbo For Life
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

Close mate, close.

Ok, australian delivered starions (no conquests over here) were designated as JA (82 to 84?) then JB (84- ) and around then around 60 JD's were made. In all only about 1650 starions were sold in australia.

'The JA's are bog stock base models, the most comon over here.

JB's had some extras, LSD better interior, headlight washers etc.

The JD's are the most desirble aussie models, being that only 62/3 were made. Also came out with 3.9 LSD, stock intercooler etc.

hope that helps :)
Last edited by Glen GSR III on Sat Sep 09, 2006 7:38 pm, edited 1 time in total.
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
Mick
Enthusiast
Posts: 643
Joined: Sun Mar 12, 2006 1:37 pm
Location: Hobart, Tas

Post by Mick »

well said glen,

i just dont think that ja's are bog rofl :beer
FS: Ford 302ci Windsor. Race prepped block, Clevite bearings, ARP fixings, Hypertectic pistons, nitrided rods, knife edged crank, Gilmer drive, chrome moly rings, Yella Terra stage 3 heads, manly valves, Comp cams 294* solid roller, YT roller rockers, Funnelweb manifold, 2 inch spacer, Proform 830cfm carb, K&N 10" stack, ICE ignition. - 0437900210
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

course they are mate, australia gets the shit models of everything. :)

why couldn't we get wideys? :?
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

In other words, all flat-bodies with improvements/add-ons with each model.
All 2.0l motors with 4 stud rims up to 15". Last model was '86/early '87.

All models had LSD as an option...which were not usually taken up as they were pricey over here.

No wide-bodies sold here...just personal imports.
Last edited by JDSTAZ45 on Sat Sep 09, 2006 2:37 pm, edited 1 time in total.
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
Casey L
[L] Plates
Posts: 12
Joined: Thu Mar 30, 2006 11:57 am

Post by Casey L »

There were only sub 2k starions imported to australia? WOW I thought these things were rare in the US!
Starquest86
[P] Plater austaz
Posts: 21
Joined: Fri May 26, 2006 4:18 am
Location: USA-Wisconsin

wow

Post by Starquest86 »

wow under 2k of them ever wow. Well i have a flatty and that is rare for american market. I look at this site alot because most of your stuff is flatty related. Over here the flatty is kinda looked down on. I love them so keep up the flat world man.

Garrett G$
1986 Dodge Conquest Le Turbo
1994 Ford Probe-Daily Driver

Turbo For Life
User avatar
rallidave
Enthusiast king
Posts: 889
Joined: Mon Feb 27, 2006 11:14 pm
Location: cairns

Post by rallidave »

didnt you know the world is FLAT :D :wink:
85 JB 4g63 SOHC
94 EVO2 4g63 DOHC
i wanna go fast
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Glen GSR III wrote:
JB's had some extras, LSD better interior, headlight washers etc.
My JA has headlight washers
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
mrb1
gtpumps.com.au
Posts: 1559
Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:

Post by mrb1 »

Glen GSR III wrote: In all only about 1650 starions were built in australia.
About 1650 sold here you mean. They were built in Japan :roll:
User avatar
mrb1
gtpumps.com.au
Posts: 1559
Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:

Post by mrb1 »

Starion_Turbo wrote:
Glen GSR III wrote:
JB's had some extras, LSD better interior, headlight washers etc.
My JA has headlight washers
Yes I have JA build No10 and it has headlight washers.
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

mrb1 wrote:
Glen GSR III wrote: In all only about 1650 starions were built in australia.
About 1650 sold here you mean. They were built in Japan :roll:
jeez, i try and help someone and you bust my balls over that. :roll:

Edited for truth :D
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

Does this mean mine would be called a jd in oz? Its a NZ new 86 with 5 stud wheels,black leather,l.s.d, 260kph speedo,type b injection and I think a tc06 turbo with intercooler.???Im confused. :wtf:
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Nah, there is no equivilant model in aus. For starters, even the JD's werent 5 stud. Yours is just a NZ New model, i believe they may have offered the same options in europe.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

JA`s (82-84) all had headlight washers, scoop bonnet, and the lsd was optional but u could tick the box all u wanted and your car would turn up with an open diff, as they had supply problems early on and we missed out until JB. as usual.. and they had the 14 inch alloy wheels.

JB (84-85) had an optional 3.5 LSD, 15 inch wheels, better interior, better wiring, more modern interior, front bumper with integrated fog lights, late model tail lights, flat bonnet, and a whole host of minor detail improvements

JD`s (86-87) had a molded front air dam, front bumper with integrated fog lights, flat bonnet, 15 inch wheels, wraparound rear spoiler (similar to the widebodies) cushy interior trim resembling a lounge chair, ran on unleaded fuel with cat converter, had the smaller tc05 turbo,intercooler, and only 110kw compared to the 125kw JA and JB. they used a factory standard 3.9 ratio diff to try and regain some acceleration back! JD`s are RARE as rocking horse shite! theres probably only about 30 still in existence over here..

starz, your car is what they refer to in japan as a JE, a 5stud narrowbody. similar to euro spec with that 260 kph speedo :drool:
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests