Rear window sun shield louvre

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Marc
Mine is bigger than yours
Posts: 260
Joined: Sat Aug 26, 2006 10:46 pm
Location: Melbourne

Rear window sun shield louvre

Post by Marc »

Do these sun shields (pictured below) fit easily on JA's and are they difficult to find?

Cheers :)

Image
Last edited by Marc on Sat Sep 02, 2006 6:36 pm, edited 2 times in total.
nzgsr
Mine is bigger than yours
Posts: 256
Joined: Wed May 31, 2006 5:16 pm
Location: auckland nz

Post by nzgsr »

yes they do there is one 4 sale at the mo on trade me shiping may b an issue though they do turn up every now and then i think u can get side ones 2 http://www.trademe.co.nz/Trade-Me-Motor ... 521978.htm
Marc
Mine is bigger than yours
Posts: 260
Joined: Sat Aug 26, 2006 10:46 pm
Location: Melbourne

Post by Marc »

thanks man....

yeah shipping might be a problem from NZ, but i'll keep my eye out for one here maybe.
User avatar
STARZILA
I love starions
Posts: 394
Joined: Thu Aug 18, 2005 7:15 pm
Location: Auckland New Zealand

Post by STARZILA »

You could get the windows tinted if you cant find one......
Marc
Mine is bigger than yours
Posts: 260
Joined: Sat Aug 26, 2006 10:46 pm
Location: Melbourne

Post by Marc »

call me tasteless ... but i kinda like how the Starion looks with a lourve :wink:

looks very 80's but yeah i wudnt mind having one, and i can always remove it or attach it whenever.
nzgsr
Mine is bigger than yours
Posts: 256
Joined: Wed May 31, 2006 5:16 pm
Location: auckland nz

Post by nzgsr »

will they tint the hatch on a starion couldnt get the sunroof tinted on my last staz as they refused said it would expant in the heat and wreck the tint wouldnt the hatch do the same?
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

rear hatch is tintable for sure, mine came with a G35 solarseal on door windows, 1/4 windows and hatch, many starions have a tinted rear hatch with no issues.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Marc
Mine is bigger than yours
Posts: 260
Joined: Sat Aug 26, 2006 10:46 pm
Location: Melbourne

Post by Marc »

Anyone know the best place to get a good quality tint at a good price in melbourne???

Tint-a-car???
emagdnim
[L] Plates
Posts: 11
Joined: Sat Aug 26, 2006 12:27 pm
Location: USA, Columbus Ohio

Post by emagdnim »

that car is a hot flatty.
Image

Bakerized 87 R04. Pushin' it to the limit.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

i`ve got one of those rear louvre`s gathering dust in the back seat of the chev... but i wouldn`t like to send it with a courier company - it`d be in a million bits before brisbane..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Don't use australia post, the million bits just plain wouldn't show up.

Sorry, Just venting aggression towards Aus post, They keep loosing my stuff and then send a crappy apology letter when I report it and they fail to locate it.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
DasGunner
Newcomer
Posts: 3
Joined: Sat Jul 08, 2006 11:29 pm
Location: Maryland.USA
Contact:

Post by DasGunner »

Sharp car .I love the louvers :D
Image
BDperformance
[P] Plates
Posts: 32
Joined: Mon Jun 05, 2006 1:36 am
Location: USA
Contact:

Post by BDperformance »

an excelent sheetmetal worker can make these from 1/16" aluminum
all you need are the dimensions from the rear hatch and the sides as well as close up pics. this might cost around 200-400$ at most. make sure the make it to clear the rear wiper arm. pwder coat or anodize and they will last longer than the car.... :D
those that can follow keep up,those who cant leave them
skip
Registered Bitch
Posts: 267
Joined: Wed Jan 05, 2005 4:44 am
Location: Adelaide, South Australia

Post by skip »

I have one gathering dust, but I'm not sure if it's outside at my old place :? . I hope it's in the garage. Unfortunately I didn't collect the 'bits' it was stuck on the rear window with.
User avatar
AXELR8
I love starions
Posts: 361
Joined: Sun Feb 29, 2004 6:01 pm
Location: Adelaide

Post by AXELR8 »

I also have one sitting in my shed, straight off of a JA...

You can have it for cheap.....

Take a holiday and drive over! :)
You think that's fast??? You got nothin' on Roger!!
Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests