Air/Fuel Meter pls help

filiboy · Post by **filiboy** » Tue May 09, 2006 1:24 am

now i'm going to have boost controller installed and i wish to install an air/fuel meter also. However this is the first time i face with that gauge and you will be very helpful if someone already faced that question before. mine is the 85' 2.0 tinterc. model and my exact question is are there special A/f meters for starions or I can take whatever is on the market. 10x a lot :beer

JD_Stazza_Brendan · Post by **JD_Stazza_Brendan** » Tue May 09, 2006 6:54 pm

your starion has to have an oxygen sensor in the exhaust.. On the Australian starions this was only on the JD model and it was at the top of the dump pipe..

Check the dump pipe on your turbo and see if there is a 1 wire sensor coming off it.. if there is just hook up the air/fuel meter to that.. thats what ive done.

iXNAY · Post by **iXNAY** » Tue May 09, 2006 7:07 pm

my ja had an ox sensor dont know if the dump pipe was off a jd? but the wire was cut anyway dude to aftermarket ecu anyway

Glen GSR III · Post by **Glen GSR III** » Tue May 09, 2006 7:18 pm

my imports got one.. its an 1982 model, bit earlier than JD.

Abalistic · Post by **Abalistic** » Tue May 09, 2006 9:25 pm

You can use what ever is on the market, it will work.

filiboy · Post by **filiboy** » Wed May 10, 2006 5:26 am

10x to all, ill check my things :beer

honest_jim · Post by **honest_jim** » Wed May 10, 2006 9:12 am

my uk one dosent have one. i had to put a boss on the down pipe for my wideband sensor

Austarion

Air/Fuel Meter pls help

Air/Fuel Meter pls help

Who is online