What does a NA 4g come out in?

[EVN666]

Just woundering what did the 4g63 came out in with its naturally aspirated form. Would it get much more performance with a NA cam in it rather than the turbo cam?

Mates of mine have a 180SX with the CA in it. They put some cams in it out of an Exa and they felt a power gain in it cause the cams are a little bigger.

Would it be a cheap and useful upgrade for my JA?

[Starion VR4]

SOHC N/A cam & turbo R the same, ground cams for 11 years at Camshaft engineering, performance cam from them is CE1001, good results
DOHC cams are different, VR4 have roller cams, N/A Skid rocker, yes N/A cams R different on some engines.
:beer

[GSRace]

MY CAR! HG and HH Galant GSR's had the 4G63 DOHC in N/A Form. I'm not a cam expert, but the cams in my car don't really come alive until about 4200rpm + (redline 7000rpm, rev limit 7500rpm, peak power 6000rpm).

So did the UK's Galant GTi.

There was an AMG Tuned Galant in Europe. They had revised cams, producing 125kw @ 8000rpm. This must be the toughest 2.0 N/A in 1990 I think.

Some Hyundai Sonata's are 2.0 I believe, they would also have this motor.

[EVN666]

Yeah i was htinking of pricing me some of the DOHC off of one of them engines. But yeah, didn't know what they came out in.

[OLD FART]

GdayStarion vr4 do u recall the specs of the CE1001 CAM GRIND ??? as they have closed down . Regards from Oldie

[Starion VR4]

they haven't closed down, but they went back 2 a single person operation after I left, BOB is the owner, ring him at 10-2pm tues-thus. specs will have alook in my book. :beer