BOV HELP

[Drift]

Hey guys
i have a turbosmart stage 3 bov installed but my mechanic replumbed it to make it plumback. Now no more sound!!! Anybody have a pic of where it should be connected?

Also i am after a really loud flutter from my car, i can sortov hear it at the moment but its not really loud... I am running close to 15psi...
Is there any easy way to achieve this.. i have a JA with a supra intercooler and 2 1/2 inch piping?

I would rather flutter sound than bov but either will do.. :D

Thanks for any help!

[fr335tyl3r]

Ok mate. There are 2 ways for a flutter sound. First is to remove the BOV and run high boost. Air pushed back toward the turbo will be disturbed as it flows back and make a fluttering noise. Second is a Super Sequential Valve which makes more of a flutter noise than a BOV PSSSSST noise.

Type 3 valve WILL NOT flutter. Please show a picture of "how he has replumbed it to plumback".

[Starion_Turbo]

This is how mine is setup, its a GFB Stealth FX variable plumb back.

The adapter is welded onto the standard crossiver pipe.

Its plumbed back to before the turbo, into the accordian hose using a brass elbow joint with a nut holding it in from inside and heatproof black silastic to keep it sealed.

[Powerslave]

Ok mate. There are 2 ways for a flutter sound. First is to remove the BOV and run high boost. Air pushed back toward the turbo will be disturbed as it flows back and make a fluttering noise. Second is a Super Sequential Valve which makes more of a flutter noise than a BOV PSSSSST noise.

Type 3 valve WILL NOT flutter. Please show a picture of "how he has replumbed it to plumback".

CRAP !!! , My staz did not flutter at all (type 3 BOV) once installed , but after fitting the intercooler , it flutters something chronic (sounds awsome).