Removal of Rear Panel :: Help

Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
User avatar
Camotec
Track Daddy
Posts: 1040
Joined: Fri Jan 09, 2004 11:33 am
Location: Australia

Removal of Rear Panel :: Help

Post by Camotec »

Hey all,

Just trying to remove the panel below but am having problems it seems to be attached at the triangle section at the back still after removing the 2 screws that hold it in?? anyone removed these before??

Image

I just want them re-sprayed.
Any Help would be appreciated :)
Cam
c'mon change my thingy
Posts: 405
Joined: Thu Jan 08, 2004 3:48 pm
Location: Rosebud, Vic
Contact:

Post by Cam »

There is bolts on the inside under the trim that you have to remove to get it off.
User avatar
Camotec
Track Daddy
Posts: 1040
Joined: Fri Jan 09, 2004 11:33 am
Location: Australia

Post by Camotec »

Hmmm it is logical isn't it, these holidays are making me more of a dumbass everyday ;P thanks cam owe u one.
pcuser51
I like starions
Posts: 141
Joined: Fri Jan 09, 2004 2:32 pm
Location: TASMANIA

Post by pcuser51 »

:o Hi ben if you have trouble with the bolts you can always tape them up and spray them like did :)
CHEERS ALAN
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:

Post by hcca »

They have clips too for some unknown reason (like 3 bolts isn't enough). I got mine powercoated.. looks pretty good.
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

Yes, you need to undo the nuts from inside the car and then slide the panel forward to disengage the clips.
User avatar
StarionChef
Creme Brulé
Posts: 744
Joined: Thu Jan 08, 2004 2:38 pm
Location: SYDNEY

Post by StarionChef »

that cat looks well pissed!
Ford G6ET 458wkws
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

LOL, poor cat!

is there a possibility of the clips breaking? just checking cos all the interior ones seem to break after you take them out once :? if they do i'm guessing it's not a problem due to the 3 bolts there anyway?
User avatar
Camotec
Track Daddy
Posts: 1040
Joined: Fri Jan 09, 2004 11:33 am
Location: Australia

Post by Camotec »

Hey all,

I removed them,resprayed them and boltsed them back on,
Decoy the clips don't break to easy i didn't break mine, as long as you pull directly up and forward you shouldn't have a problem.

Thanks again guys, the car is starting to look cool :)
User avatar
hcca
Enthusiast king
Posts: 884
Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:

Post by hcca »

Haven't you seen a cat with a lime on it's head before? :D

I took the clips out altogether.. they seem completely unnecessary to me (plus weight saving eh Cookie :))
User avatar
Cookiemonster
Mother Goose
Posts: 3177
Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney

Post by Cookiemonster »

hcca wrote:Haven't you seen a cat with a lime on it's head before? :D

I took the clips out altogether.. they seem completely unnecessary to me (plus weight saving eh Cookie :))
You learn fast grasshooper. :wink:
User avatar
Starion VR4
almost postwhore
Posts: 1293
Joined: Fri Jan 09, 2004 5:08 pm
Location: Brisbane

clips

Post by Starion VR4 »

if you tell me how to post pics, i have taken a pics to show you where the clips are. 8) see down further
Last edited by Starion VR4 on Fri Jan 23, 2004 12:07 am, edited 1 time in total.
Image

30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
flappa
Lancer is the answer
Posts: 446
Joined: Wed Sep 10, 2003 1:01 am
Location: Australia

post pics

Post by flappa »

You need to host it somewhere, then use the image tags like this:

[img] http://image_url [/img]
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

camotec has put his hand up for hosting to austarion users. check the general section.
User avatar
Starion VR4
almost postwhore
Posts: 1293
Joined: Fri Jan 09, 2004 5:08 pm
Location: Brisbane

Post by Starion VR4 »

Image

hope this works 8)

does it
Last edited by Starion VR4 on Fri Jan 23, 2004 12:06 am, edited 6 times in total.
Image

30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests