Schultz JB Starion
Another Update
Well, I have got the engine in and fired it up a few times, fitted the radiator and filled it with water. That was my first stuff-up.
I forgot to change the water pump and water seal in the pipe. Old age on my part.
Fixed that and then took me 3 goes to get the timing belt marks to line up.
I have to swap the battery with my other car one, which will only take a couple of minutes but I am too scared to go to the shed. I know that there is something not right with the way the engine is running.
I will let you know...............
I forgot to change the water pump and water seal in the pipe. Old age on my part.
Fixed that and then took me 3 goes to get the timing belt marks to line up.
I have to swap the battery with my other car one, which will only take a couple of minutes but I am too scared to go to the shed. I know that there is something not right with the way the engine is running.
I will let you know...............
Another Update
Engine starts once and then although turning over it does not want to start once warmed up. :?
I will wait till it cools down and then try again.
It also has a backfire under acceleration.
It could be in the map in my Motec computer. I have to set up a computer in the shed with Win98 on it to see if I can then talk to the car. Win7 and WinXP don't work as I have tried that before.
The joys of owning a Starion.
Lucky for me "Life is wonderful".
If anyone has any suggestions I will try anything right now.
I will wait till it cools down and then try again.
It also has a backfire under acceleration.
It could be in the map in my Motec computer. I have to set up a computer in the shed with Win98 on it to see if I can then talk to the car. Win7 and WinXP don't work as I have tried that before.
The joys of owning a Starion.
Lucky for me "Life is wonderful".
If anyone has any suggestions I will try anything right now.
G'day Alspos,
To be honest the reason it was not doing too well was "superior German bloody stupidity" on my part.
I had to move the dizzy 2 teeth and push the spark plug leads on properly.
I lined up the pulley and the cam gear but when it came to lining up the dizzy I fell asleep. Just doing too many things all at the same time and forgetting to finish a few things.
I probably be driving along and the gearbox falls out. Wouldn't surprise me!
To be honest the reason it was not doing too well was "superior German bloody stupidity" on my part.
I had to move the dizzy 2 teeth and push the spark plug leads on properly.
I lined up the pulley and the cam gear but when it came to lining up the dizzy I fell asleep. Just doing too many things all at the same time and forgetting to finish a few things.
I probably be driving along and the gearbox falls out. Wouldn't surprise me!
Time for another update on my progress
I took it for a test drive today. :D :D :D :D
I missed it soooo much.
Still need to bolt things together some more and found the exhaust leaking where the adapter plate bolts onto the manifold but already have the lot pulled out again and just waiting to get some new studs whenever I can manage to go to the big city again.
Also will have to bolt the seat in and need a windscreen and windows in the doors and lots of other little things but its alright because I had a test drive and now feel all happy again.
Funny thing was that I thought I better take it real easy going for a drive but as soon as I was out on the road that idea went out the window. Straight up to 30 pounds of boost and it comes on really savage and I loved it :D and I don't think I have blown the head gasket yet.
I missed it soooo much.
Still need to bolt things together some more and found the exhaust leaking where the adapter plate bolts onto the manifold but already have the lot pulled out again and just waiting to get some new studs whenever I can manage to go to the big city again.
Also will have to bolt the seat in and need a windscreen and windows in the doors and lots of other little things but its alright because I had a test drive and now feel all happy again.
Funny thing was that I thought I better take it real easy going for a drive but as soon as I was out on the road that idea went out the window. Straight up to 30 pounds of boost and it comes on really savage and I loved it :D and I don't think I have blown the head gasket yet.
Time for another update on my progress
I had a rest for 6 weeks due to health reasons but finally managed to get back in the shed.
I have new studs in the exhaust and ended up cutting some gaskets out for the adapter on both sides. I tried to get them machined (4 surfaces) but they reckon it might end up costing about $950.00 so I am trying some gasket material ($3.00) from the exhaust shop.
Tomorrow I am ordering my new windscreen and maybe by the end of the week I will be able to drive around again.
If it all works I will take a few more pictures of the finished result and post them on here.
I have new studs in the exhaust and ended up cutting some gaskets out for the adapter on both sides. I tried to get them machined (4 surfaces) but they reckon it might end up costing about $950.00 so I am trying some gasket material ($3.00) from the exhaust shop.
Tomorrow I am ordering my new windscreen and maybe by the end of the week I will be able to drive around again.
If it all works I will take a few more pictures of the finished result and post them on here.
Time for another update on my progress
I got my new windscreen in and just waiting for some light bulbs for the front indicators and have to bend the passenger door a bit so the window will shut.
-
- Enthusiast
- Posts: 607
- Joined: Fri Nov 16, 2007 3:50 pm
- Location: Oregon, USA
- Contact:
Re: Time for another update on my progress
Engine bay is looking pretty good!! How fun was the test drive with no windscreen??Schultz wrote:I had a rest for 6 weeks due to health reasons but finally managed to get back in the shed.
I have new studs in the exhaust and ended up cutting some gaskets out for the adapter on both sides. I tried to get them machined (4 surfaces) but they reckon it might end up costing about $950.00 so I am trying some gasket material ($3.00) from the exhaust shop.
Tomorrow I am ordering my new windscreen and maybe by the end of the week I will be able to drive around again.
If it all works I will take a few more pictures of the finished result and post them on here.
-Robert
Thank you enthused
Thank you GormzZ, the lights are different but I wanted something different.
Thank you Komeuppance
At first I wanted to paint the engine bay black with the motor out it would be easy but I wanted to keep it the way it was because it gives the car a certain character.
I was crazy to go for a drive without the screen in it. I just couldn't help myself ~ I missed the car that much.
The wind was blowing in my eyes and I could hardly see, but I just had to do it.
Thank you GormzZ, the lights are different but I wanted something different.
Thank you Komeuppance
At first I wanted to paint the engine bay black with the motor out it would be easy but I wanted to keep it the way it was because it gives the car a certain character.
I was crazy to go for a drive without the screen in it. I just couldn't help myself ~ I missed the car that much.
The wind was blowing in my eyes and I could hardly see, but I just had to do it.
-
- Enthusiast
- Posts: 607
- Joined: Fri Nov 16, 2007 3:50 pm
- Location: Oregon, USA
- Contact:
Who is online
Users browsing this forum: No registered users and 37 guests