Wednesday Night Drags Eastern Creek 22/08/12

iXNAY · Post by **iXNAY** » Sun Aug 19, 2012 6:23 pm

Hey All,

was talking to Shannon (www.18u) today and we were discussing about going to the drags on Wednesday night to do some runs.

we were thinking about having a meet up and mini cruise and dinner before the drags just seeing if anyone is keen.

any other ideas let me know

regards
Ryan

1320ft · Post by **1320ft** » Sun Aug 19, 2012 6:32 pm

And you would pick the week im I'm Darwin!

iXNAY · Post by **iXNAY** » Sun Aug 19, 2012 6:34 pm

1320ft wrote:And you would pick the week im I'm Darwin!

Sorry Aaron!

can you give everyone a run down of costs if people want to run there car down the strip?

this is my last week in NSW so thought id try make an effort to catch up with some forum members

1320ft · Post by **1320ft** » Sun Aug 19, 2012 8:12 pm

Karnts!

Yes, $50, gates open at 4.30, racing from 6pm. Make sure your helmet meets either as1698:2006 or snell sa2005 or sa2010 or has the applicable british/FIA/sfi standard. Long sleeve shirt, long pants, enclosed shoes are required.

Car must be safe, as in good enough to pass a pink slip. Battery secure, radiator overflow etc. if you are running x ply slicks, you need a tailshaft loop & quicker than 12.50 et, you need front runners. Quicker than 11.99 you will need to purchase an andra sst license, which you buy on the night. There is to be no fuel cells, pumps, lines etc in the drivers compartment.

fugazi · Post by **fugazi** » Sun Aug 19, 2012 11:46 pm

.... and don't run under 11sec without a cage!!! LOL

1320ft · Post by **1320ft** » Mon Aug 20, 2012 8:16 am

fugazi wrote:.... and don't run under 11sec without a cage!!! LOL

Lol, that too.

But I don't think anyone in Sydney has the power to do it.

www.18u · Post by **www.18u** » Mon Aug 20, 2012 11:23 am

Well it depends if we can use your slicks Aaron :p

thrash · Post by **thrash** » Mon Aug 20, 2012 12:27 pm

1320ft wrote:
fugazi wrote:.... and don't run under 11sec without a cage!!! LOL
Lol, that too.

But I don't think anyone in Sydney has the power to do it.

how much power would you need to run an 11 in a starion?

OLD FART · Post by **OLD FART** » Mon Aug 20, 2012 3:50 pm

thrash wrote:
1320ft wrote:
fugazi wrote:.... and don't run under 11sec without a cage!!! LOL
Lol, that too.

But I don't think anyone in Sydney has the power to do it.
how much power would you need to run an 11 in a starion?

According to my trusty Moroso power speed calculator say my staz weighs 3000lbs with 325 hp atw =11.7 secs @111mph :D

You can find out here http://www.hotrodpitstop.com/tool.php

1320ft · Post by **1320ft** » Mon Aug 20, 2012 7:49 pm

www.18u wrote:Well it depends if we can use your slicks Aaron :p

You can use the 4 stud wheels with the old 26x8,5's, but I plan on doing a huuuuge burnout to scrub in the new m&h's!

OLD FART wrote:According to my trusty Moroso power speed calculator say my staz weighs 3000lbs with 325 hp atw =11.7 secs @111mph

Yep, I keep my physical one handy, even have it here with me in Darwin. By my Moroso calcs, mine should run 9.429 @ 143.5!

fugazi · Post by **fugazi** » Mon Aug 20, 2012 9:37 pm

The Moroso Slide Rule never lies... LOL
But the driver-input isn't possible to put in the calc.
Some guys over here has problems getting in the 10's with (said) 850+hp...

NXTIME · Post by **NXTIME** » Tue Aug 21, 2012 9:20 am

What would the ET and TS be for 700rwhp with 3400lbs?

iXNAY · Post by **iXNAY** » Tue Aug 21, 2012 1:59 pm

I HAVE TO CANCEL SORRY GUYS! STARION IS BEING PICKED UP TOMORROW TO TRANSPORT TO WA!

OLD FART · Post by **OLD FART** » Tue Aug 21, 2012 3:41 pm

NXTIME wrote:What would the ET and TS be for 700rwhp with 3400lbs?

app 9.6 @139mph

NXTIME · Post by **NXTIME** » Tue Aug 21, 2012 7:19 pm

OLD FART wrote:
NXTIME wrote:What would the ET and TS be for 700rwhp with 3400lbs?
app 9.6 @139mph

nice ;) :beer

Austarion

Wednesday Night Drags Eastern Creek 22/08/12

Wednesday Night Drags Eastern Creek 22/08/12

Who is online