Great Tarmac Rally Videos

Display your ride and post power figures, dyno runs, drag and circuit times.
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Great Tarmac Rally Videos

Post by JJH »

Here's what I got up to on the weekend:
Stage 1:
Stage 2:
Stage 3: (long one; 17:48)
Stage 4: (another long one; 17:41)
Last edited by JJH on Thu Aug 16, 2012 12:45 pm, edited 4 times in total.
popup
Mine is bigger than yours
Posts: 252
Joined: Thu Jun 07, 2012 11:14 pm
Location: UK

Post by popup »

Awesome! good quality vid too!
1986 UK 2 litre intercooled narrow body
User avatar
panda
Enthusiast
Posts: 680
Joined: Fri Apr 18, 2008 2:56 pm
Location: Mount Gambier, South Australia

Post by panda »

Well done Jeff. Lucky not to do any damage with the half spin in the second clip. How rare is it to see snow in country devastated by bush-fires. Nice to see all the vegetation regenerating again. How did to finish in the results ?
Dreams have no limits.

1982 JA - Ex Enthuzed
1982 JA - For Sale - pending
1983 JA - Ex Auto-cross car - being parted out
1983 JA - Being parted out
1984 JA - Rolling shell - For Sale
1985 JB - Rally car project
1985 JB - Autocross car
1985 JB - Week-end cruiser
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

Results were secondary at this event as I wanted to test out the new diff as well as play with suspension settings & tyre pressures.
And being a relatively cheap 1.5 day event, I just wanted to use it as a lead up event to Targa High Country in November.
It's really hard to practice for tarmac rallying because you just can't get the same intensity pushing it on open public roads, so this event was perfect.
Having said that, I was pretty happy with my times, but with only 14 cars competing I didn't really have a yard stick to measure up to.
We also took some in-car footage which I was able to use to determine the cause of the little spin in stage 2; for some unknown reason I decide to shift back into second on the left hander which caused the rears to lock-up causing the nice, gentle spin :oops:
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

What ratio did u run Jeff?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

4.625, was awesome.
I've made some comments on it in my Cruises & Events post.
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Yes, a close call there Jeff! I assume a bit of compression lockup, left turn, moist road and a touch of brake all conspiring to unsettle you.

Could have been worse though......



OLD FART
Austarion Occupant
Posts: 3448
Joined: Sun Jun 19, 2005 1:34 pm
Location: Brisbane

Post by OLD FART »

Jeff there were some solid "guide posts" on the stages :D LOL
The roads looked to be a bit challenging due to leaves , bark and running and standing water.
You did well to keep it on the black stuff :beer
I've had mine since 03 07 92
85 JB 2323cc DOHC 4G63
THE OLDER I GET THE FASTER I WAS
GROWING OLD IS MANDATORY GROWING UP IS OPTIONAL
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

You got some nice flow up Jeff on the second one before the whoopsie...doesn't take much hey!

How long is the third one, I've had three goes at watching these so far...now back to it for me!
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

enthuzed wrote:How long is the third one
17:48... :beer
Image
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

OLD FART wrote:Jeff there were some solid "guide posts" on the stages :D LOL
Yes, definitely no shortage of reasons for not going off the road, but they all still end up invisible when things are going well.
RallyStarion
Big Dorifto
Posts: 89
Joined: Fri Jan 09, 2004 7:33 pm
Location: Melbourne, Eastern Subs

Post by RallyStarion »

Good to see Jeff.

A couple of the boys from Ralliart were up there and they sent a few pics thru to me over the weekend.

Glad to see you have the 4.6 diff in, now you just have to get some ratios in the box and believe me it will transform the car again. Maybe we should catch up and you can take the Rallycar for a drive.

I have a heap of in car from the Alpine Rally last year but not up to speed on how to load it. Could be a good reason to catch up anyway?

Brian.
Dirt is for racing on, Bitumen is for getting there.
JJH
Enthusiast
Posts: 651
Joined: Mon Oct 18, 2004 10:09 am
Location: Melbourne - East

Post by JJH »

I'll give you a call Brian as I'd like to catch up for that illusive beer :beer
And I spoke to one of the Ralliart guys on Friday, I think it was Peter, he was helping out on a really nice Evo X.
RallyStarion
Big Dorifto
Posts: 89
Joined: Fri Jan 09, 2004 7:33 pm
Location: Melbourne, Eastern Subs

Post by RallyStarion »

Yeh, that would be Pete West. A legend in motorsport, has built two Bathurst winning engines in his time when he worked for Gibson Motorsport.
He came down and serviced for me at the Alpine Rally last year, had a ball.

The pics I saw of your car were sent from him.

Beer sounds good, will be in touch when I am back in town.

Brian.
Dirt is for racing on, Bitumen is for getting there.
fugazi
Enthusiast
Posts: 716
Joined: Thu Oct 02, 2008 10:30 pm
Location: Stockholm, Sweden
Contact:

Post by fugazi »

Great ralleying/racing! Nice videos! :beer
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests