twin cam head

evoJB · Post by **evoJB** » Mon Jul 02, 2012 6:51 pm

Have a big port head for sale(VR4). Bought it to swap my head as it was supposed to fit, but I have an evo head with the smaller ports, so manifold no go.
Was rebuilt before i purchased it and has not been installed. previous owner had it sitting in the shed without being wrapped so the cams have some what looks like slight surface rust, but comes off with a little degreaser and a rag, so maybe just crap in the air.
will need to have face machined again as there are couple of scratches on it, but have been assured by mechanic that it all looks fine to go straight on after machining.

$250

Justice · Post by **Justice** » Fri Jul 06, 2012 7:32 pm

Hi. Will this head fit a standard JB Starion block?

fugazi · Post by **fugazi** » Sat Jul 07, 2012 5:54 am

Oh yes... it will fit the block, but you'll need new/other pistons.

redzone · Post by **redzone** » Sat Jul 07, 2012 10:19 am

Fitting it to the block is the easy part

Austarion

twin cam head

twin cam head

twin cam head

Who is online