FS(NZ): Parting '87 Starion GSR-V - being crushed in 3 days!

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

too right mate!
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

can you give me a shipping quote on the hatch spoiler and left hand black plastic interior door sill trim to queensland 4558? cheers!

i'm pretty keen on that hatch spoiler hey :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

both door sill trims have gone to JAS my friend.

Will work on a quote of the hatch over the next day or so.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

that hatch spoiler is mine...mine I tell ya!

:oops:
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

holy fucking shitballs!

due to the length (approx 1500mm) NZPost can only do it via door to door air mail service at $267. Trying to find other ways of sending it. Unfortunately it gets expensive with NZPost if a package is over 1050mm in any of the dimensions.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
Lunacy
nearly postwhore
Posts: 1355
Joined: Fri Jul 22, 2005 3:31 pm
Location: Land of Confusion

Post by Lunacy »

I up the bid to $40 for the hatch spoiler :)
Image
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

NXTIME wrote:that hatch spoiler is mine...mine I tell ya!

:oops:
Haha back off charlie you already took the one off mine before you got rid if it :P
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

redzone wrote:
NXTIME wrote:that hatch spoiler is mine...mine I tell ya!

:oops:
Haha back off charlie you already took the one off mine before you got rid if it :P
I still got it in the shed :D :D :D (Came with the auto widey!)

I thought the length was somewhere between 110-120. You would need to pack it wisely!!
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

I just assumed when packaged up it would be 1400-1500, but even at 1100-1200mm it's still 50+mm too long to be shipped in the cheap rate.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Some amusing & informative posts. Been a really long 3 days to crushing (I know the plan changed, that's what plans are for!!)
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

It's still going to get crushed - unless someone decides to take the shell minus most bits (and probably less a trans tunnel too), just not for a few weeks/months now.

Thankfully most important bits have been saved/sold off though, not a great deal of important bits left really. Still has front screen and rear hatch, misc trim bits, dash, two sets of front headlights and mechanisms, fuel tank etc.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

do you still have the a pillar trim? what condition is it in?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

left hand side has gone with the roof skin/b pillar trims, while the right hand side has been put aside for OldManMike.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

what about the trim piece that covers the instrument cluster? If it hasn't been called upon, what condition is it in? Cheers
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
dirtygalant
nearly postwhore
Posts: 1446
Joined: Sun Jun 19, 2005 7:27 pm
Location: Sunny Brisbane Australia!

Post by dirtygalant »

which one? I had to pull it all to bits to remove the two headlamp switch clusters, so there's the main padded cover and the plastic surround underneath it. Either way I will have both.
ImageImage
E39A Galant VR-4 Evolution | A164A Eterna GSR | 6G72 RWD Conversion Forum
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests