Contact Details - 0429 924 739, reply here, pm me.
I'll be coming to brisbane weekend of the 20th Feb. So if you live there, free postage. Otherwise i'm located in Rockhampton, CQ. (7 hrs north of Bris City.)
I'll put all the parts up seperate. Just in the one topic for ease of viewing.
Head & Cam
Price - $1500 complete.
4g63 SOHC 1g Turbo Head.
Port and Polish
CC'd chambers
Std inlet valves
3mm oversize exhaust valves
3mm oversize exhaust ports - same as 4g64 head.
Double valvesprings - when i got it off rad it had 80psi seat pressure. Now has 140psi to meet with the specs of the cam. Also no coil bind etc etc.
Adjustable Alloy Cam Gear
Cam - custom from Surecam.
The specs are INLET ------- EXHAUST
centerline ----- 107.00 atc 117.00 btdc
dur @ 50 thou -297.82 ---- 295.43
lobe sep -------112.0 ------ 112.0
lift at lobe ---0.33098 ----- 0.33079
Cam Cover - Painted in some pretty red/pink colour. Very gay.. haha
Head will be in perfect condition. Is @ JB Race Engines now getting a few new valves and a overhaul. I'll give you the receipt for this.
Inlet Manifold
Price - $500
L300 Runners with polished custom plenum grafted on. VN throttlebody. Plenty of vaccum ports. Has custom throttle cable bracket, water outlet and fuel rail included.
Got it flowed today. All 4 runners flow around 120cfm +/- 2cfm @ 10"
If you want first hand, ring John @ JB Race Engines.
Exhaust Manifold - SOLD
Turbo - SOLD
This setup made 340rwhp on 16psi with a stroker bottom end. Very long power curve, was also boosting very quick with minimal lag - GT3076r.
Here's the dyno sheet.
Green - 300rwhp @ 11psi
Red - 340rwhp @ 16psi
End long post. Haha.
