VIN number on JD

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Noelw
[L] Plates
Posts: 10
Joined: Fri Dec 12, 2008 2:43 pm
Location: Adelaide

VIN number on JD

Post by Noelw »

I have gone through all the messages that I can find on where to find the VIN number on my Starion JD, but despite several searches I cannot find it. I did find it several years ago but I can't remember where I found it and much to my extreme frustration I still can't find it. Help appreciated. Cheers.
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

LOOK IN THE BOOT
just behind the rear seats...... under the carpet :D
1985 JB - owned from new.
1986 JD - used to own one.......
Noelw
[L] Plates
Posts: 10
Joined: Fri Dec 12, 2008 2:43 pm
Location: Adelaide

Post by Noelw »

I am pretty sure I found it in the engine bay last time, but can't remember where, but I will try out your suggestion. Thanks.
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

VIN plate on the fire wall. Theres also numbers on the right front strut tower.
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

firwwall? strut tower?
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
User avatar
thrash
Austarion Occupant
Posts: 3028
Joined: Mon Apr 02, 2007 10:09 pm
Location: Sydney, Australia

Post by thrash »

haha Al beat me to it
quest wrote:
WANTSOM wrote:Personally, I find sloppy boxes very unsatisfying. I like them tight and taught to the point that if you dont have to push to get it in then its probably too old and time to get a new one :P
don't try explaining that to her tho..... just leave. lol
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

plate's not on the firewall on a JD.. in the boot..


yes rh strut tower for the stamped numbers.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
kushman
Big Dorifto
Posts: 89
Joined: Sun May 11, 2008 10:44 pm
Location: wellington

Post by kushman »

in nz the ex has a tag on the inside of the bonet up just next to the bonnet latch up the front
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

.................its in the boot!!! :P
1985 JB - owned from new.
1986 JD - used to own one.......
kushman
Big Dorifto
Posts: 89
Joined: Sun May 11, 2008 10:44 pm
Location: wellington

Post by kushman »

so the JD in aus is pretty much the same as the 86-89 ex euro in nz?
if not whats the differnce. are they both the highest output stock 2l starion?
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

thrash wrote:firwwall? strut tower?
That's a separate investigation, looking for the fur-wall. LOL
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
starspeed
Former Freak
Posts: 196
Joined: Tue May 30, 2006 11:38 pm
Location: Port Macquarie

Hi noel

Post by starspeed »

how are you going noel rod here!! it is in the boot mate !!!
well thats where it is in my JD :D hows the EFI going ?? :beer
STARSPEED

86 COLTSPEED JD STARION ( my baby )
2000 MITSUBISHI CHALLENGER LS 4X4 ( daily driver )
2010 KIA SORRENTO R ( family car )
83 stebercraft 475 DF - 70hp johnson ( my toy )
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

kushman wrote:so the JD in aus is pretty much the same as the 86-89 ex euro in nz?
if not whats the differnce. are they both the highest output stock 2l starion?

they're quite different!

JD had 4 stud wheels and small brakes, and was the slowest aussie delivered starion in stock form as it was unleaded.. premium and boost wakes them up though, they're factory intercooled. have a squiz at the JA JB JD post in general i think it is...
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

redzone wrote: have a squiz at the JA JB JD post in general i think it is...
Yep, right place.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
RiceThief
my mangina paid for my staz
Posts: 2129
Joined: Thu Jan 15, 2004 1:23 pm
Location: Brisbane

Post by RiceThief »

kushman wrote:so the JD in aus is pretty much the same as the 86-89 ex euro in nz?
if not whats the differnce. are they both the highest output stock 2l starion?
Highest output stock 2l would be the gsr-v with the dash engine.
Starions are a disease, the only cure is poverty.

Project Grand Sport Racing Five
Post Reply

Who is online

Users browsing this forum: No registered users and 6 guests