FS [Vic] Clearing some bits...Offers

Got something to sell? Looking for a rare Starion part? Got something bust that needs replacing? then this is your place!
Post Reply
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

FS [Vic] Clearing some bits...Offers

Post by enthuzed »

There's a bit of stuff waiting for new owners...offers please...

Starion block, complete bottom end but dismantled with 0.5mm over pistons, requires thrust build up to crank and slight rebore. Motor was just worn out, would oil up one of the plugs. Had no detonation, the pistons look brand new. Decided not to rebuild this one now as I replaced it with an already finished motor.

Standard TC06-11A turbo, non-watercooled, no cracks. Condition unknown, treat as a core for rebuild.

Smaller TC05-12A with wastegate. No cracks. Also condition unknown.

Another TC06-11A, this one watercooled. Still attached to motor and I haven't run it up. Haven't even looked at it.

Three JA ECI manifolds, one good working non-leaking one, another untested and a third semi-pulled down (injector leaking issue).

Four JA brake master cylinders and reservoirs

Two power steering pumps

Three ECU's to suit JA, also a JB one

Three ignitor boxes suit JA

Two wiper motors

JA Series 11 (two-tone) brown door trims

JB burgundy rear seat and side pieces, B pillar covers, headlining.
Burgundy boot carpet and standard parcel shelf (JB door trims are gone, so too are the A pillar covers) Passenger side sunvisor with good clip.

Custom rear parcel shelf, clips in where factory one goes, is hinged and painted matt black with nice Pioneer 100w 2way 6 x 9 speakers.

Stock suspension and chassis parts

Two standard open diffs (No LSDs)

JB inlet manifold and cleaned injectors, complete JB wiring loom, ignitor box, ECU, knock box and map sensors. Crossover pipe.

JB antenna module

JB Bonnet, good nick.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

and a partridge in a pear tree LOL
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
Noddy
Enthusiast
Posts: 603
Joined: Thu May 24, 2007 11:15 pm
Location: Perth

Post by Noddy »

I might grab the rear parcel shelf - burgundy and sunvisor -burgundy
PM how much you want (is the parcel shelf cut with speakers?

Ta :D
1985 JB - owned from new.
1986 JD - used to own one.......
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Noddy wrote:I might grab the rear parcel shelf - burgundy and sunvisor -burgundy
PM how much you want (is the parcel shelf cut with speakers?

Ta :D
Shelf not cut, and you have mail.

Sorry Wantsom, fresh out of Pear trees, getting a mold made for the partridge when I can find a good specimen. Or is that mould?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
madeofmilo
Enthusiast
Posts: 578
Joined: Fri May 21, 2004 5:53 pm
Location: Melb - East

Post by madeofmilo »

do you have any rust free front quater panels? Cheers Dave
My JA has perfect motor - FMIC - forgies - high flow head but...rusted front guards and keyed on every panel. Time to get serious or time to take it to the tip.
MitsuMadness
I love starions
Posts: 481
Joined: Fri Mar 19, 2004 3:50 pm
Location: Melbourne

Post by MitsuMadness »

Hiya!! I might be interested in a diff, always handy to have more, especially with what I plan on doing :D

Oh and do any of your brake master cylinders have the booster still on them? Could use a spare of those if one's going too.
<--== When I die, I want to be buried sideways ==-->

1988 GSR-VR Widebody 2.6L
1984 Starion JA (stripped down for track)
1983 Starion JAs x2 and shed of Starion, VR4 and EVO bits for various track projects
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Dave, sorry no 1/4 panels spare. Keeping the ones I've got.
Responded to all posts/emails now, please check your mail.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Gentlemen, your goods are packaged up and going in the post tomorrow.
Do we have some other interested parties.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
User avatar
bigmoz
Enthusiast king
Posts: 886
Joined: Thu Jan 22, 2004 1:04 pm
Location: Melbourne Australia

Re: FS [Vic] Clearing some bits...Offers

Post by bigmoz »

enthuzed wrote: Stock suspension and chassis parts

how much?

moz
85 JB, forged, larger valves, ported and polished microtech, sonata mpi, td06 20g, intercooler, willwood brakes, koni suspention, 3.9LSD and more shit i cant remember

82 JA, blueprint SIRUS 4g63, dumped and a cooler 17's, exhaust... DEAD :(
big moz (chopyou@hotmail.com)
paradox
I like starions
Posts: 113
Joined: Sun Mar 01, 2009 8:43 pm
Location: Tasmania

Post by paradox »

is the antenna all working? got a broken one with my car
Entaran
I love starions
Posts: 448
Joined: Mon Sep 27, 2004 6:07 pm
Location: Ballarat, Vic

Post by Entaran »

How much for the block and where are you in melb?
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

pm me a price for all your TC06's that have uncracked exhaust housings :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
stouty
****WELCOME TO AUSTARION!****
Posts: 1
Joined: Wed Aug 12, 2009 7:25 am
Location: Forster-Tuncurry NSW

Post by stouty »

Interested in one of the master cylinders PM'd you.

Cheers
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Stouty, Enteran and Redzone, you guys have mail.
Paradox, only have a crappy aftermarket aerial so it wont suit you.
Bigmoz, please PM me the exact components you require.

Thanks guys.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Post Reply

Who is online

Users browsing this forum: No registered users and 67 guests