Twin cam coil on plug

Display your ride and post power figures, dyno runs, drag and circuit times.
Post Reply
avandull
Mine is bigger than yours
Posts: 346
Joined: Thu Aug 12, 2004 4:49 pm
Location: Hobart

Twin cam coil on plug

Post by avandull »

Check out my new coil on plug setup. No ignition leads needed anymore, just the coil sitting on top of the spark plug.

The igniter units are built in to the top of the coil. So I have fed them directly with signal from my Haltech computer.

The coils are from a 2005 Toyota Tarago, part number 90919-02244. Purchased for $120 for the set from my local Just Jap wreckers.

I cut the mounting plate for the coils out of 4mm aluminum using a jigsaw and drilled the holes for the coils with a step drill.

I needed to change the spark plugs to Resistor spark plugs because the electrical noise from the firing coils was making my Haltech misfire when on boost.

The setup works well. It can handle 20 psi of boost and pulls hard.

Image

Image

Image

Image
Agatha the ugly Starion
wa_greg
Dorifto!
Posts: 61
Joined: Sat Jan 10, 2004 6:05 am
Location: Kingston, Jamaica

Post by wa_greg »

very nice setup
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

And very neat to boot. Well done....excellent research :beer
S0LJAH
I love starions
Posts: 371
Joined: Fri Feb 09, 2007 1:54 pm
Location: New Zealand

Post by S0LJAH »

interesting
do you see it as a performance upgrade?

just curious as all of my nissan mates run away from there factory cop setups as fast as they can trying to change to wasted spark setups like our twincams run factory
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

^^^ thats coz the nissan units are shitty and unreliable :)
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Check out MRB's M&W versions -

nice set up :beer
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

I've done the same thing on the 2.3..........here a pic:

Image
avandull
Mine is bigger than yours
Posts: 346
Joined: Thu Aug 12, 2004 4:49 pm
Location: Hobart

Post by avandull »

Very tidy.
Do you know what type of car your coil packs come from?
Your coil setup looks like what M&W ignition are selling. I have also seen similar coil setups on ebay in America and have been wondering what the coils come from.
Agatha the ugly Starion
Bitza
I've been here before
Posts: 244
Joined: Mon May 29, 2006 1:53 pm
Location: Adelaide SA

Post by Bitza »

I bought the COP from America.............the part number is C533 AC Delco.........same ones they use on the Holden Rodeo.........the one with the V6 and rounded headlights..........sorry can't remember the model.
avandull
Mine is bigger than yours
Posts: 346
Joined: Thu Aug 12, 2004 4:49 pm
Location: Hobart

Post by avandull »

Thanks for the info
Agatha the ugly Starion
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests