HKS FCD

limau · Post by **limau** » Tue Apr 27, 2004 8:07 pm

hi 1 question please,do HKS Fuel Cut Defencer worked on JA starion?thanks :)

mrb1 · Post by **mrb1** » Tue Apr 27, 2004 9:49 pm

Yes there was FCD for the Starion. HKS like the other Japanese performance companies are very poor on older parts. They are not interested in anything old even if they used to make lots of good stuff when the vehicle was current. I am not sure if the listing is still in the catalogue. Otherwise you would have to find an old catalogue or send them an email asking which part number to use.
Better still put an aftermarket ECU on it and then you won't have to worry about it ever again.

decoy · Post by **decoy** » Wed Apr 28, 2004 2:03 am

if not turbosmart make one for a couple of hundred i think it costs.

limau · Post by **limau** » Wed Apr 28, 2004 3:56 pm

Thanks guys,already check with hks ,the type for starion is STD(standard)
yeah the aftermarket ecu is better than this thing ,but hope for now this thing can help to eliminate my 0.7bar boost cut(is it?). just wanna hit 1.0 bar(14.3psi) for my engine.is there will be any problem when i do this?
thanks :)

tmz_99 · Post by **tmz_99** » Wed Apr 28, 2004 4:26 pm

possibly, I hope u r running an intercooler...

limau · Post by **limau** » Wed Apr 28, 2004 4:41 pm

yeah i'm running a galant vr4 intercooler

decoy · Post by **decoy** » Wed Apr 28, 2004 5:36 pm

well the fuel cut is there because the little injectors are reaching their limit and are screaming their little heads off for mercy. well not that bad, but its there to stop you running lean where the injectors can't keep up. although my fuel cut doesn' till 16psi. tis a wierd one but make sure its not pinging when u put it on.

limau · Post by **limau** » Wed Apr 28, 2004 7:45 pm

decoy wrote:well the fuel cut is there because the little injectors are reaching their limit and are screaming their little heads off for mercy. well not that bad, but its there to stop you running lean where the injectors can't keep up. although my fuel cut doesn' till 16psi. tis a wierd one but make sure its not pinging when u put it on.

16psi...lucky u :) mine just hit 0.7 bar and buuuk(fuel cut).is there anything u do to your ecu? pinging? what u mean by that?
thanks

pcuser51 · Post by **pcuser51** » Wed Apr 28, 2004 8:50 pm

:D Decoy i dont think its the injectors thats the problem its the ecu,
example: iam running a rechiped ecu 3inch exaust from turbo back,
RX7 intercooler 18 psi and makeing 171 rwh and injectors havent reached
there full duty cycle on original TWO injectors and no pinging :D

decoy · Post by **decoy** » Thu Apr 29, 2004 2:19 am

maybe the rechipped part on the ecu acts as a fuel cut defender? 18psi and no pinging on standard injection! i'm jelous! although i could never figure out why i'm the only one that cuts at 16 instead of 10-11 like everyone else.

limau · Post by **limau** » Thu Apr 29, 2004 4:02 pm

maybe u r a chosen one decoy :D

mrb1 · Post by **mrb1** » Thu Apr 29, 2004 5:24 pm

pcuser51,
At what revs do you make 171hp?

decoy · Post by **decoy** » Thu Apr 29, 2004 5:39 pm

limau wrote:maybe u r a chosen one decoy :D

haha, if i was the chosen one, my engine wouldn't have blown up :(

limau · Post by **limau** » Thu Apr 29, 2004 5:48 pm

decoy wrote:
limau wrote:maybe u r a chosen one decoy :D
haha, if i was the chosen one, my engine wouldn't have blown up :(

your engine blown up?aiyoooo..now u r scaring me :o , u boost until 16psi and blown your engine?

quest · Post by **quest** » Thu Apr 29, 2004 8:40 pm

HK$$$$$ sux... hate that dam company for all its overpriced useless garbage they offer, especially way back in the day. $200usd FCD when $5 electronics do the same thing.

In the west, we put an adjustable boost compensating regulator downstream of the oe one to kick up the fuel pressure, giving considerable more capacity from oe injectors. Upgrade the pump also.

Does the boost sensor on the firewall trigger boost cut at a preset level? If so, I've seen us guys put an inexpensive regulator and guage in the sensing vacuum line, that holds the boost just under the cutoff. Seen one run 20+psi using this method.

Austarion

HKS FCD

HKS FCD

Who is online