sonata manifold wanted

13bsigma · Post by **13bsigma** » Sat Jul 26, 2008 9:19 pm

Hi, I'm after a sonata manifold to convert my SOHC to multi point. I'm going to run a Microtech DIGI fuel only ECU in my car as the engine is going into a bright green Mitsubishi scorpion. i have a factory starion ECU, but no wiring loom, so to save me somehow fitting the air flow meter and somehow figuring out the wiring, i'm going after market. the car will not be running too extreme, ie standard boost, so i can get away with a cheap ECU.

Now with the ignition side of things, can i just run the distributor to a coil and the ignition will work? or will i need anything else or extra?

Thanks for the help and suggestions :)

BLOFLY · Post by **BLOFLY** » Sat Jul 26, 2008 9:46 pm

I will have one to sell in a few weeks, fully modded, 3inch inlet (VN throttlebody) with vr4 injectors, fuel rail, everything ready to go. offers? Also look in technical. There is a mod there to use bosch ignition parts with the standard dizzy and coil, works well too.

13bsigma · Post by **13bsigma** » Sat Jul 26, 2008 10:23 pm

Sweet. i'm fitting an autronic and new clutch to my turbo suzuki baleno at the moment, so i could free up money now, but it would be harder for me, so a few weeks would be much better. :D plus, i still have to put the head on and install the engine top the car. so a few weeks would be perfect actually.

How much are you after for it? i just sold one of my magna manifolds to suit RWD the other day for $200 with 8 injectors, 2 regulators, 2 TPS switches, the lot. are these ones worth more?

Are you after a magna manifold to suit RWD or some jestalt mags? 17 by 7 i have two sets one i think will suit a starion. maby we could do a swap if your interested? I'm located just north of Sydney.

Thanks for the help with ignition.

thrash · Post by **thrash** » Sun Jul 27, 2008 6:54 pm

post some picks of those wheels...

and offset details.. :D

13bsigma · Post by **13bsigma** » Sun Jul 27, 2008 7:49 pm

I dont have a digital camera, but where are you located in sydney? you can come look at them if you want.

Station · Post by **Station** » Mon Jul 28, 2008 3:52 am

Sonata?! We have loads of these in the local scrappy!! I even got my injector connectors from one two days ago! Any one got a guide for doing this?!

redzone · Post by **redzone** » Mon Jul 28, 2008 7:52 pm

not a job for a beginner, but austarion member ukstarionT3 has done it, maybe pm him for uk local advice???

Station · Post by **Station** » Mon Jul 28, 2008 9:40 pm

No worries, I am not a beginner! I can even weld (not aluminium though). I know good fabricators though.

thrash · Post by **thrash** » Mon Jul 28, 2008 9:54 pm

Station wrote:Sonata?! We have loads of these in the local scrappy!! I even got my injector connectors from one two days ago! Any one got a guide for doing this?!

yeah but this is for the 2 litre sohc.. don't you have the 2.6 in the uk?

redzone · Post by **redzone** » Mon Jul 28, 2008 11:20 pm

most UK starions are 2.0, they only got the 2.6 shitter (sorry phil) in the last ones sold there..

Austarion

sonata manifold wanted

sonata manifold wanted

Who is online