12 months of Grief came to an end today

Display your ride and post power figures, dyno runs, drag and circuit times.
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

12 months of Grief came to an end today

Post by WANTSOM »

Well 18 months actually but 2005 was a year of total mind numbing frustration trying to get bugs sorted in the Track Car motor dept. Well today after a long haul and invaluable help from MRB1, Merlin and Cookie it went on the dyno and came out the other side healthier. Also a big plug for Mark at MRC Dyno in Castle Hill - the guy is awesome. Give him a call for your tuning needs.

Here is the graph. This was done in 4th (1:1) in shootout mode on 15/16 lb boost.

Image

Motor is a NxMerl special after the original proved too tired. (Bottom end is ex-NxTime and DASH head is ex Merlin. The other crap is mine and is where the headaches were.)

Anyways at long last (2 and half years in the build - half of which was spent getting the motor sorted) its up and running. :D
Never argue with an idiot, it brings you down to their level and they beat you with experience.
85_cordia_gsr
Lil' Dorifto
Posts: 43
Joined: Sat Feb 05, 2005 4:50 pm
Location: Nowra, NSW

Post by 85_cordia_gsr »

hey man, saw ur starion on a trailer this arvo, mustve been on the way back from the dyno, noticed the WANTSOM plates and knew who owned it.. lol
looks pretty tidy :)
what turbo are you using?
cheers
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

TC06 - been hi-flowed a bit tho.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
iXNAY
nearly postwhore
Posts: 1414
Joined: Sun Jan 30, 2005 2:30 pm
Location: Bathurst

Post by iXNAY »

nice numbers there WANTSOM!

especially for only have a TC-06 strapped on that bitch!
SR20 powered starion what have I done..... :P
User avatar
mrb1
gtpumps.com.au
Posts: 1559
Joined: Wed Jan 21, 2004 1:35 pm
Location: Sydney
Contact:

Post by mrb1 »

Man I am happy to see that graph :beer
User avatar
starion4me
I've been here before
Posts: 215
Joined: Fri Jan 09, 2004 6:11 pm
Location: Sydney

Post by starion4me »

Congratulations Greg!

What was the solution to the ongoing problem?

Jas
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Injectors - specifically the Haltech didnt like low impedence Rochestot style injectors. As soon as it went high imp Bosch car became tuneable.

Haltech say their ECU will run Low imp but in my case it wouldnt.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
User avatar
NXTIME
Registry Nazi
Posts: 2972
Joined: Thu Jan 08, 2004 3:14 pm
Location: Sydney, NSW

Post by NXTIME »

Congrats on getting the car all sorted, Greg. When will it be making its track debut?

Impressive dyno figure there with a highflow TC06 :) Just one thing I did notice was that the BP figure is set to 99.9. Any particular reason why Mark used that figure?
Please register your vehicle details on the AUSTRALIAN STARION REGISTRY <HERE>


1 x 3.2T
1 x 2.8T
3 x 2.6T's
1 x 2.0T
ProZac
G33Kz0r
Posts: 2674
Joined: Thu Nov 27, 2003 1:26 pm
Location: Christchurch, New Zealand
Contact:

Post by ProZac »

Trials and tribulations :) feels fucking good now tho dosent it? :)
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

Yep, much relief. :)

Day wasnt without its little dramas (as is the norm with this car) but a big hurdle was crossed nevertheless.

Motor has a very strong bottom end with a DASH head. Running MPI, XF throttle body, twin coil wasted spark with CDI and driven by an old Haltech E6A.
Never argue with an idiot, it brings you down to their level and they beat you with experience.
decoy
Let Me Out!
Posts: 4424
Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:

Post by decoy »

:beer
_
_________________
hoongirl
Ace Girl Retraction
Posts: 1144
Joined: Thu Jan 08, 2004 2:18 pm
Location: Sydney
Contact:

Post by hoongirl »

Hooray :beer

Bet ya can't wipe that smile from his dial!
User avatar
Darkelf
RiceKing!
Posts: 640
Joined: Thu Jan 08, 2004 2:25 pm
Location: Sydney

Post by Darkelf »

Nothing much to do now Greg?

So what's the next project? :D
User avatar
Alspos
Flucking kwankers
Posts: 4107
Joined: Thu Jan 08, 2004 2:09 pm
Location: Melbourne
Contact:

Post by Alspos »

Looks like a photochop job to me .......
User avatar
WANTSOM
Pushing my luck
Posts: 2115
Joined: Mon Jan 12, 2004 1:43 pm
Location: Sydney

Post by WANTSOM »

LOL
Never argue with an idiot, it brings you down to their level and they beat you with experience.
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests