Rear window sun shield louvre
Rear window sun shield louvre
Do these sun shields (pictured below) fit easily on JA's and are they difficult to find?
Cheers :)
Cheers :)
Last edited by Marc on Sat Sep 02, 2006 6:36 pm, edited 2 times in total.
yes they do there is one 4 sale at the mo on trade me shiping may b an issue though they do turn up every now and then i think u can get side ones 2 http://www.trademe.co.nz/Trade-Me-Motor ... 521978.htm
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
rear hatch is tintable for sure, mine came with a G35 solarseal on door windows, 1/4 windows and hatch, many starions have a tinted rear hatch with no issues.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
-
- racking my brains
- Posts: 5900
- Joined: Thu Oct 06, 2005 10:46 pm
- Location: sunshine coast qld
- Contact:
i`ve got one of those rear louvre`s gathering dust in the back seat of the chev... but i wouldn`t like to send it with a courier company - it`d be in a million bits before brisbane..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q
www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
- Starion_Turbo
- Enthusiast king
- Posts: 898
- Joined: Wed Dec 08, 2004 5:32 pm
- Location: South Australia
- Contact:
Don't use australia post, the million bits just plain wouldn't show up.
Sorry, Just venting aggression towards Aus post, They keep loosing my stuff and then send a crappy apology letter when I report it and they fail to locate it.
Sorry, Just venting aggression towards Aus post, They keep loosing my stuff and then send a crappy apology letter when I report it and they fail to locate it.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
-
- [P] Plates
- Posts: 32
- Joined: Mon Jun 05, 2006 1:36 am
- Location: USA
- Contact:
an excelent sheetmetal worker can make these from 1/16" aluminum
all you need are the dimensions from the rear hatch and the sides as well as close up pics. this might cost around 200-400$ at most. make sure the make it to clear the rear wiper arm. pwder coat or anodize and they will last longer than the car.... :D
all you need are the dimensions from the rear hatch and the sides as well as close up pics. this might cost around 200-400$ at most. make sure the make it to clear the rear wiper arm. pwder coat or anodize and they will last longer than the car.... :D
those that can follow keep up,those who cant leave them
Who is online
Users browsing this forum: No registered users and 5 guests