Headlights

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Blair
[P] Plater austaz
Posts: 24
Joined: Wed Jan 25, 2012 9:09 am
Location: NSW
Contact:

Headlights

Post by Blair »

Hi Guys,

My headlights are playing up a wee bit, I can only sometimes (if I'm luck) flick between high beam and low beam. Most of the time if i try and put on the high beams the lights just go off completely. Occasionally if i flick the stalk (hahaha thats rude) then it does switch to high beams.

Obviously the lights themselves are fine, I'm wondering if its the switch thing on the stalk (thats what the mechanic thought too)??? Ive read in other posts about people having issues with 'relays' but none of the pictures they've posted are there any more.

Any advice? Is there somewhere i can buy another 'stalker switch'??

cheers
Blair
:wtf:
I know enough to know that I don't know enough...

Current cars:
2002: Vauxhall Corsa 1.8 SRI
1984: Mistubishi Starion JA
User avatar
1320ft
almost postwhore
Posts: 1071
Joined: Mon May 03, 2010 8:33 pm
Location: St Andrews NSW

Post by 1320ft »

The correct name for that is the Combination switch blair.

And I think you will have to have it rebuilt as such.
The Forum Parts Guy

www.vibrantperformance.com for all your performance fabrication needs

IRS OUTLAW, 2.3L VR4 Powered X235 Drag Car

Here to run out of your life & take all your money!
JDSTAZ45
almost postwhore
Posts: 1250
Joined: Sat Feb 12, 2005 10:00 pm
Location: Inner West, Sydney

Post by JDSTAZ45 »

I've got a spare JA one you can try!

I'm pretty sure it's some poor contact that's causing the problem with the sports steering wheel there and all.

Can post to you next week! PM your address details!

:beer Mal
Imports.
88 GSR-VR Widebody 2.6L
87 GSR-V 12V Dash 2.0L
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Something you might not have considered...have you checked the wattage of the globes you have? Anything more than a 55/60w and you could have or have had some frying of wires. Depending on where the issue resides you could have these issues. They usually melt the wiring connector, but it could stuff up within the stalk, and you can get a shorts in the combo stalk.

It is highly likely that something physically has gone wrong inside the stalk.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Post Reply

Who is online

Users browsing this forum: No registered users and 7 guests