More head questions

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
Benny_Mac
[L] Plates
Posts: 17
Joined: Thu Aug 23, 2007 5:50 pm
Location: adelaide

More head questions

Post by Benny_Mac »

Hey all,
Just another few questions for ya's, i did try and search but it came up with pages and pages of stuff that really wasn't what i was looking for. Any help would be great thanks.

1. Will a vrs kit of say an L300 or an other 4g63 engine fit, i got quoted $160 for a starion one and think thats a bit steep.

2. If i get an L300 head, can i still use my cam and rocker gear and will everything still bolt up.

Thanks in advance

Benny Mac
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

Which L300 head specifically?

There are two main types in Australia - The 2.0L 4g63 and the 2.4L 4g64.

AFAIK the VRS for a 4g63 L300 will be the same. And the cam, etc will all fit.

Different story with the 4g64 L300 stuff. The VRS is virtually the same except the head gasket is different.
The 2.4L (from about 1990 and was EFI) head can also be used and your cam, etc would fit.
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah the 63 L300 etc set will fit, but they dont have all the turbo gaskets and associated parts, just a normal vrs. get a permaseal graphlex one too, not an acl or whatever. they're way better.
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
enthuzed
Austarion Occupant
Posts: 3578
Joined: Tue Apr 06, 2004 1:21 pm
Location: Melborno
Contact:

Post by enthuzed »

redzone wrote:yeah the 63 L300 etc set will fit, but they dont have all the turbo gaskets and associated parts, just a normal vrs. get a permaseal graphlex one too, not an acl or whatever. they're way better.
Can you remember what brand of head gasket you used Dave on the 64 head for the orange car?
Reduce fuel costs by 15-20% & cut emissions by 1/3rd...
Increase engine performance & prolong engine life...
How?
Click the website button below & watch the 3 minute video.
Post Reply

Who is online

Users browsing this forum: No registered users and 17 guests