injection issue

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

injection issue

Post by Glen GSR III »

hey all,

my ja was having overfueling issues at idle...starting to get embarassing. :roll:

I had a talk to dave (redzone) and he suggested swapping over injection mixers...I had a spare in the shed, so i swapped em over...everything matched back up. All good.

Start the car, (starts, good so far) and the idle begins to creep up...it steadily creeps up untl it hits bout 2000rpm. I checked the throttle cable and it doesnt have any weight on it....I dunno, can anyone think of why the idle creeps up like that?

Any help would be greatly aprecciated
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Have you adjusted the engine warm up pellet?

Does it still creep up at 1/3 engine temperature?
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

ummm...no, to be honest, i've got just about no experience with cars in general....kinda learn as you go. :)

Where exactly is this warm up pellet? and i didnt let it warm up to 1/3 engine temp...didnt like the 2100rpm idle. LOL
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Ok

See the highlighted screw, start ur car and let it run a sec and then turn it counter clockwise, rpm should drop, adjust it to something like 1000 for warming up. Once temp hits operating level idle should return to whatever its adjusted to on the linkage which should be around 850 - 900rpm.

back of throttle body:
Image
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

lol glen thats basically what they're supposed to do. except not quite to 2000 rpm, i think the spec is 1300 when dead cold, i'll check my manuals tomorrow for the exact rpm. i think u may not have had a starion with a working fast idle before! :beer
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

Thanks guys! wound the screw right out but its still idlin pretty high when cold (1800-1900 rpm). Goes down to bout 1000-1100 when warm, only thing is that the car wont hold engine temp while on the highway...could this be a faulty thermostat?
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah try thermostat first mate, how high is it getting?
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Glen GSR III
guess its me thats broke
Posts: 581
Joined: Wed Jan 11, 2006 7:34 pm
Location: Toowoomba, Queensland

Post by Glen GSR III »

engine temp? in town, maybe just up to or above the first temp line, but on open roads its like its dead cold...and then the warm up idle starts to creep up again...lol
82 GSR III starion (respray nearly complete!)
83 JA Starion...Daily Driver
01 KTM 520 trail bike (reason the staz isnt finished yet)
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

yeah sounds like thermostat not there or stuck open
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
Starion_Turbo
Enthusiast king
Posts: 898
Joined: Wed Dec 08, 2004 5:32 pm
Location: South Australia
Contact:

Post by Starion_Turbo »

Agreed, I had a thermostat that I once removed, it was in 4 pieces just sitting there lol.

Get a thermostat thats about 76 degrees works great runs at about 1/4 most of the time and helps run cooler in the city and hot days.
No thermostst would definatley make the car run in constant warmup mode were it idles high and guzzles through fuel.
Powerplant: Chipped stock ECU, 2044cc, 8.5:1, head intake enlarged and polished, exhaust manifold enlarged,
Balance-shafts eliminated, Intercooled, TC06 @ 10psi, 2.5" high flow exhaust system and dump pipe.
redzone
racking my brains
Posts: 5900
Joined: Thu Oct 06, 2005 10:46 pm
Location: sunshine coast qld
Contact:

Post by redzone »

stock is 88 degrees, too high for qld, go for a 82 degree one i found that to be best by far..
Fibreglass airdams $370, fibreglass front bumpers $260, reco drag links $165, alloy radiators $925 (unpolished), h/l switch rebuilds $125, all plus freight.
Coxs Automotive (07)54433507 3/5 Service st Maroochydore Q

www.facebook.com/coxsautomotive
www.coxsautomotive.com.au
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

redzone wrote:stock is 88 degrees, too high for qld, go for a 82 degree one i found that to be best by far..
Yep, what Redzone said. The stock L300 thermostat fits the Starion and is 82 degrees.
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
Post Reply

Who is online

Users browsing this forum: No registered users and 43 guests