Help Please! Car Splutters when accelerating** Fixed!!!***

All technical questions and answers regarding starions, being modifications to maintenance.
Post Reply
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Help Please! Car Splutters when accelerating** Fixed!!!***

Post by JAS »

This is ProZac's old starion. Ive just spent the last few weeks trying to get the thing running well but have had no luck :x

Ok, so it normally starts fine but when I rev it is just dies, then comes back to life. If its warm it will rev with no load on it, but when I drive down the road I have to baby it. If I give it to much gas it coughs and splutters.

Ive checked the AFM and the Vac advance. Ive cleaned the MAP out, had lots of oil in it. And Ive put another dissy in it.
Oh yes and the spark plugs are new cause it had some really odd looking ones in it.

Please help.

Jason
Last edited by JAS on Sun Jul 15, 2007 12:04 pm, edited 1 time in total.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
BLOFLY
I like starions
Posts: 143
Joined: Sun Apr 24, 2005 10:14 am
Location: Brisbane

Post by BLOFLY »

Sounds like a fuel problem to me, maybe only one injector working or bad connectors. But since you've changed distributor and plugs I'd also check static timing, and firing order, aka right plug wires onto the correct plug. basically check the simple things first.
SOHC, Multipoint, Steampipe Exhaust Manifold, Intercooled.
User avatar
Chryzla
Princess
Posts: 1320
Joined: Wed May 19, 2004 6:26 pm
Location: Adelaide, SA
Contact:

Post by Chryzla »

brand new dizzy cap and rotor?

what condition are the leads in? including high tension lead

how is the coil?
1983 JA Staz
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

Does indeed sound like a fuel problem.

A couple of things you might like to check, Jas:

First, have you tested the connectivity from the injector wiring to the circuit board in the ECU? With age, the spring fingers on the ECU connector weakens, but it's a simple matter to bend them back into working position with a jeweller's screwdriver.

Second, check that the connector to the injector solenoid resistor pack (near the airbox) is properly engaged.
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

BLOFLY wrote:Sounds like a fuel problem to me, maybe only one injector working or bad connectors. But since you've changed distributor and plugs I'd also check static timing, and firing order, aka right plug wires onto the correct plug. basically check the simple things first.
Im sure its not fuel cause once its past 3000rpm it revs fine.
The firing order is right but I haven't checked the static timing. Thanks
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Chryzla wrote:brand new dizzy cap and rotor?

what condition are the leads in? including high tension lead

how is the coil?
Yes new rotor and cap.
I changed the coil and didn't make any difference. And I put another high tension lead on it some thing.

Thanks for you input
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

JPC wrote:Does indeed sound like a fuel problem.

A couple of things you might like to check, Jas:

First, have you tested the connectivity from the injector wiring to the circuit board in the ECU? With age, the spring fingers on the ECU connector weakens, but it's a simple matter to bend them back into working position with a jeweller's screwdriver.

Second, check that the connector to the injector solenoid resistor pack (near the airbox) is properly engaged.
Thanks man.

My next day off in Wednesday, ill get into it then.
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

Fixed Fixed fixed :D :D :D

In a fit of madness I pulled the computer out and put a non-intercooled one in, and its now running heeeeeeps better.

Ill pull the cover off the computer to see whats going on inside it at a later date. Sweet finaly a starion I can use as a daily driver :D
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
JPC
almost postwhore
Posts: 1016
Joined: Fri Feb 13, 2004 9:25 pm
Location: Perth, WA

Post by JPC »

Goodonya, JAS!

Sounds like it could be "the" connector problem :wink:
Starion nutter since 1988...
1983 JA, 1984 JA, 1985 JB (all rego'd, all running :D )
User avatar
JAS
Enthusiast king
Posts: 993
Joined: Sun Mar 14, 2004 8:27 am
Location: Christchurch

Post by JAS »

JPC wrote:Goodonya, JAS!

Sounds like it could be "the" connector problem :wink:

:) Oh thats right. lol I might check that out. Thanks man
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi

http://www.facebook.com/marvinmartiannz

ImageImage
User avatar
S73R
Big Dorifto
Posts: 72
Joined: Fri Dec 09, 2005 9:39 pm
Location: Loxton

Post by S73R »

the connnetor problem???
"Only one way to live, Full BOOOST!!!!!!!!"
Post Reply

Who is online

Users browsing this forum: No registered users and 24 guests