KM-132 Gearbox Rebuild kit

MYToyGE · Post by **MYToyGE** » Wed Nov 08, 2006 4:47 pm

hi all, im after a KM-132 Gearbox rebuild kit, its for a narrow block 4g52/54 i "heard" they the same as the station boxes... if anyone might know where i could get a kit from or information it would be greatly appreciated.
cheers
MYToyGE

ProZac · Post by **ProZac** » Wed Nov 08, 2006 4:49 pm

A KM132 is definatly whats in a starion, i can tell you that much, its stamped on zee plate on zee firewall.

MYToyGE · Post by **MYToyGE** » Wed Nov 08, 2006 4:56 pm

i figured so, just my box is for a GE Scorpion, its the 2.0 ltr Mitsu box KM-132 just questioning the internals.

hcca · Post by **hcca** » Fri Nov 10, 2006 12:24 pm

Pretty sure you can get them through Repco etc.. not cheap though. Last time I checked it was $400+. I found it was cheaper to just buy second hand boxes when mine broke.

87_starion · Post by **87_starion** » Wed Nov 15, 2006 5:22 pm

hcca wrote:I found it was cheaper to just buy second hand boxes when mine broke.

You broke a starion box??? How?

Starion VR4 · Post by **Starion VR4** » Wed Nov 15, 2006 7:07 pm

Break them? My son has broken 3, 2nd gear, mine is on the way..... looking for a T56. :beer

87_starion · Post by **87_starion** » Wed Nov 15, 2006 7:21 pm

Eh?? serious... that sucks... I just did synchros and bearings in my
one (maintanence only, no issues) I wont be thrashing it again

I thought they were strong.. hence all the black marks and smoke in the picture to the left

MYToyGE · Post by **MYToyGE** » Wed Nov 15, 2006 9:00 pm

im goin through my 2nd.... syncros n dog teeth are gone. 2nd, 3rd gone n its popin outa 2nd.

anyone know where i can get a kit from.... i been told CBC bearings for only bearing gaskets n a few nuts $400 or so..bux.

n repco...but they sure know how to ridiculously price there shit....so im not even goin to bother there/

Superscan · Post by **Superscan** » Sat Nov 18, 2006 8:01 am

The Starion KM132 and the Scorpion/Sigma KM132 box ARE TOTALLY DIFFERENT.

The Starion box uses Angular ROLLER BEARINGS and the Scorp/Sig box uses Angular contact BALL BEARINGS. Reverse gears in the Stazz box are helical but in the Sig/Scorp they are straight cut.

The bearings and gears ARE NOT interchangable.

Hope you get this Info BEFORE you buy the kit.

Cheers.

GasJA · Post by **GasJA** » Sat Nov 18, 2006 11:37 am

I have a broken gearbox that you can have.
If you are interested in ripping into it.

BEST advice get one from the wreckers 150-180 AUD.

From pesonal experience, if you are running a Starion engine with Sigma/Scorp gearbox and diff - the trans/diff won't last long anyway.

MYToyGE · Post by **MYToyGE** » Tue Nov 21, 2006 8:51 pm

thanks so much guys for the replys been a big help.
i got another box on the floor that i could sway.. but i wanted some new parts. thee has to be a supplier somewyere in aus....
hrmm

thanks again guys. i realy appreciate it.

Austarion

KM-132 Gearbox Rebuild kit

KM-132 Gearbox Rebuild kit

Who is online