Here are a few pics that my mate took of my car last week. You can see my stereo install in the boot which isn't finished yet as well. :D
Sunday Afternoon at the spit
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
OMG thats F**king nice mate
I see you have a cold air intake setup in the right hand airdam hole, My widebody has a oil cooler there, infact mines got 3 oil coolers. Im not sure what they all do. Its got the engine oil cooler in the normal pozzy and two more on each side of the airdam. I know there not for the powersteering as its the normal pipe style cooler for that. Any idea what they do? I will have to get under the thing to trace the holes I guess.
Anyway very very nice starion, well done mate :beer :beer
I see you have a cold air intake setup in the right hand airdam hole, My widebody has a oil cooler there, infact mines got 3 oil coolers. Im not sure what they all do. Its got the engine oil cooler in the normal pozzy and two more on each side of the airdam. I know there not for the powersteering as its the normal pipe style cooler for that. Any idea what they do? I will have to get under the thing to trace the holes I guess.
Anyway very very nice starion, well done mate :beer :beer
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
And I see that your one has no seat belts in the back?? Neither does mine, how did you get it rego'ed with no rear seatbelts?
1984 Sigma Super, Turbo Wagon
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
1990 GSR-VR 50,000ks
1984 GSR II 4G63 302kw atw at 24psi
http://www.facebook.com/marvinmartiannz
- JustPaus_88TSi
- Dorifto!
- Posts: 67
- Joined: Thu Aug 05, 2004 7:46 am
- Location: Az, Usa
In the US, the cooler on the passenger/right side only there if the car is an automatic. The cooler on the driver/left side is for the AC condenser..
Not sure about other countries, but in the US, only the 89 model had upper seatbelts in the rear.. My 88 only had lapbelts in the back.
And from the pictures here, you wouldn't be able to tell if he had 3-point belts in the back. I could be wrong though.. :D
See this picture below.
You see where the harness belt is mounted? That's mounted in the same spot that the 89's are.
Not sure about other countries, but in the US, only the 89 model had upper seatbelts in the rear.. My 88 only had lapbelts in the back.
And from the pictures here, you wouldn't be able to tell if he had 3-point belts in the back. I could be wrong though.. :D
See this picture below.
You see where the harness belt is mounted? That's mounted in the same spot that the 89's are.
Last edited by JustPaus_88TSi on Sun Aug 20, 2006 10:03 pm, edited 1 time in total.
88TSI-nicely modded...
01 IS300, GTE swap, 60-1 Garrett, Tein, Volk CE28N etc...
-
- Woodwide
- Posts: 3133
- Joined: Thu Jan 08, 2004 6:24 pm
- Location: Gold Coast
- Contact:
Who is online
Users browsing this forum: No registered users and 11 guests