Technical questions and ideas regarding how your Starion looks inside and out, bodykits to stereos.
Camotec
Track Daddy
Posts: 1040 Joined: Fri Jan 09, 2004 11:33 am
Location: Australia
Post
by Camotec » Fri Jan 09, 2004 1:51 pm
Hey all,
Just trying to remove the panel below but am having problems it seems to be attached at the triangle section at the back still after removing the 2 screws that hold it in?? anyone removed these before??
I just want them re-sprayed.
Any Help would be appreciated :)
Cam
c'mon change my thingy
Posts: 405 Joined: Thu Jan 08, 2004 3:48 pm
Location: Rosebud, Vic
Contact:
Post
by Cam » Fri Jan 09, 2004 2:01 pm
There is bolts on the inside under the trim that you have to remove to get it off.
Camotec
Track Daddy
Posts: 1040 Joined: Fri Jan 09, 2004 11:33 am
Location: Australia
Post
by Camotec » Fri Jan 09, 2004 2:07 pm
Hmmm it is logical isn't it, these holidays are making me more of a dumbass everyday ;P thanks cam owe u one.
pcuser51
I like starions
Posts: 141 Joined: Fri Jan 09, 2004 2:32 pm
Location: TASMANIA
Post
by pcuser51 » Fri Jan 09, 2004 3:21 pm
:o Hi ben if you have trouble with the bolts you can always tape them up and spray them like did :)
CHEERS ALAN
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:
Post
by hcca » Fri Jan 09, 2004 4:51 pm
They have clips too for some unknown reason (like 3 bolts isn't enough). I got mine powercoated.. looks pretty good.
Cookiemonster
Mother Goose
Posts: 3177 Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney
Post
by Cookiemonster » Fri Jan 09, 2004 5:01 pm
Yes, you need to undo the nuts from inside the car and then slide the panel forward to disengage the clips.
StarionChef
Creme Brulé
Posts: 744 Joined: Thu Jan 08, 2004 2:38 pm
Location: SYDNEY
Post
by StarionChef » Sat Jan 10, 2004 1:04 am
that cat looks well pissed!
Ford G6ET 458wkws
decoy
Let Me Out!
Posts: 4424 Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:
Post
by decoy » Sat Jan 10, 2004 7:21 am
LOL, poor cat!
is there a possibility of the clips breaking? just checking cos all the interior ones seem to break after you take them out once :? if they do i'm guessing it's not a problem due to the 3 bolts there anyway?
Camotec
Track Daddy
Posts: 1040 Joined: Fri Jan 09, 2004 11:33 am
Location: Australia
Post
by Camotec » Sat Jan 10, 2004 7:55 am
Hey all,
I removed them,resprayed them and boltsed them back on,
Decoy the clips don't break to easy i didn't break mine, as long as you pull directly up and forward you shouldn't have a problem.
Thanks again guys, the car is starting to look cool :)
hcca
Enthusiast king
Posts: 884 Joined: Thu Jan 08, 2004 9:24 pm
Location: Brisbane
Contact:
Post
by hcca » Sat Jan 10, 2004 4:24 pm
Haven't you seen a cat with a lime on it's head before? :D
I took the clips out altogether.. they seem completely unnecessary to me (plus weight saving eh Cookie :))
Cookiemonster
Mother Goose
Posts: 3177 Joined: Thu Jan 08, 2004 4:33 pm
Location: Sydney
Post
by Cookiemonster » Sat Jan 10, 2004 11:21 pm
hcca wrote: Haven't you seen a cat with a lime on it's head before? :D
I took the clips out altogether.. they seem completely unnecessary to me (plus weight saving eh Cookie :))
You learn fast grasshooper.
Starion VR4
almost postwhore
Posts: 1293 Joined: Fri Jan 09, 2004 5:08 pm
Location: Brisbane
Post
by Starion VR4 » Mon Jan 12, 2004 10:22 pm
if you tell me how to post pics, i have taken a pics to show you where the clips are. 8) see down further
Last edited by
Starion VR4 on Fri Jan 23, 2004 12:07 am, edited 1 time in total.
30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
flappa
Lancer is the answer
Posts: 446 Joined: Wed Sep 10, 2003 1:01 am
Location: Australia
Post
by flappa » Mon Jan 12, 2004 10:33 pm
You need to host it somewhere, then use the image tags like this:
[img] http://image_url [/img]
decoy
Let Me Out!
Posts: 4424 Joined: Tue Sep 09, 2003 3:03 pm
Location: Far from home
Contact:
Post
by decoy » Mon Jan 12, 2004 10:46 pm
camotec has put his hand up for hosting to austarion users. check the general section.
Starion VR4
almost postwhore
Posts: 1293 Joined: Fri Jan 09, 2004 5:08 pm
Location: Brisbane
Post
by Starion VR4 » Fri Jan 16, 2004 11:17 pm
hope this works 8)
does it
Last edited by
Starion VR4 on Fri Jan 23, 2004 12:06 am, edited 6 times in total.
30PSI,2.4L! Wolf 3D Ver 4. VR4 Head.
Users browsing this forum: No registered users and 11 guests