FS: JA Starion parts, TO4 Turbo, Simmons - NEW PICS

[NXTIME]

I have had alot of offers for a number of parts, so I am now selling car off in parts. I need the garage cleared.



CAR SOLD

parts still left:

- one standard 3.55 open JA diff $100
- gearboxes: two left $200 each
- rear hatches $100
- hatch struts, re-gassed, $70 a pair

- Seats and trims interior - retrimmed front and back seats in grey vinyl with darker grey pattern cloth centres in very good conditon, no rips or tears. Rest if interior in grey. Cost me over $1,000 just to retrim. Selling the lot for $400.

Interior Pics:

http://members.optusnet.com.au/~charlies/mypic4.JPG
http://members.optusnet.com.au/~charlies/mypic5.JPG

- Simmons V4 16 x 8 and 9 with 215 and 245 Falken tyres - $1100

Simmons Pics:
http://members.optusnet.com.au/~charlies/mypic1.JPG
http://members.optusnet.com.au/~charlies/mypic3.JPG

- Simmons B45 polished 15 x 4 and 8's with rubber SOLD

- TO4 turbo with 60mm comp wheel, O-trim turbine woth .70 a/r (reco'd about 1000km's ago) with s/s oil feed line and modified return pipe, plus s/s intake piping and filter
- 38mm turbonetics deltagate external wastegate
- modified and ported stock exhaust manifold
-All three - $1700 (will not seperate) - SOLD


- bottom end SOLD
- L300 port matched -$250 - SOLD
- RX7 S4 550cc injectors -$250 - SOLD
- Head, reco and ported 5000K's old cost $1000, sell $700 - SOLD
All three for $1100
- Microtech Digi 1 PRO fuel and ignition ECU with loom tuned to suit above. $450 or $1500 with intake/injectors/head - SOLD

Heavy duty clutch kit with solid centre clutch plate done 5,000kms. Cost $700, asking $300.

- Custom polished s/s intercooler piping with blue silicon hoses (Piping, polishing and hoses cost me over $900 alone, custom PWR cooler RRP $1200).
- $300 for the piping and silicon hoses,
- $400 for damaged intercooler (doesn't leak but requires repair - about $150-200) - SOLD

- custom s/s exhaust manifold to suit to4 (not fitted) SOLD

- 2.4L 4G64B block+crank - SOLD
- Stock VR4 exhaust manifold $50





some more pics can be seen here:
http://www.angelfire.com/emo2/sydneysta ... XTIME.html

[NXTIME]

Plenty of interest, but not many buyers.

Engine just needs a cam and tune and it will make some big numbers.
Test drive in car. :D


TTT

[merlin]

If there is an LSD in there somewhere Charlie, I'll buy it :D

[NXTIME]

Sorry, David. No LSD's.

[merlin]

dag-nabit deputy dawg, when will my search end

[NXTIME]

Try the good ol' U S of A :D

[gotrice?]

pms

[japhil]

mate - im looking at buying an 82 ja. it drives, but has hit a stop sign. its f....ed the front bar, & apron behind it. the drivers headlight & assy are stuffed too. also need a dash shroud & a windscreen.do u have these bits & if so - how much? oh he wants $1k for it- the bodys good, silver, has electric leather recaros (scabby looking). 2 new tyres, hotwires (yuk!), out of rego but has been started weekly. it has 270k on it , turbos been rebuilt & motors ok. reckon this sounds alright 4 the money?

[NXTIME]

TTT

[Sargeant_Khan]

how much for the engine? clutch?

[fil]

do you have any aircon parts foward of the connections near the battery ie compresor radiator and any other required parts.
Its too hot

[NXTIME]

Yes.

[DD Phil]

How much for the 2.1 single cam, just the motor no manifolds?

Phil

[karl_2ltgc]

I am interested in the microtech.
Does it come with a handcontroller? Loom?
Price?
I want to run a 2.6 on efi.

[MelbStazz]

i would like to know more about the simmons, are they still available ( the V4/5's ???)
please pm me.
:beer

drew