I am adding a rear shock spacer I designed. I need a minimum of 20 peices ordered for this part to be ordered. Part will be made from 1/8" Steel (A-36 hot roll). Good for spacing up a sagging rear shock or welding in to beef of the rear bolt holes if you want to cut the opening larger to adjust rear camber plates more.
Air Diversion Pannel
10 = $65.00
20 = $57.50
30 = $55.00
Radio Kit; No Gauge Holes
10 = $32.50
20 = $26.00
30 = $22.50
Radio Kit; 3 Gauge Holes (Bellow Radio)
10 = $33.50
20 = $28.00
30 = $23.50
Radio Kit; 3 Gauge Holes (Above Radio)
10 = $33.50
20 = $28.00
30 = $23.50
Radio Kit; Double Din
10 = $32.50
20 = $26.00
30 = $22.50
Rear Shock Spacers. $10 each.
Powder Coating for Radio kits$5
Gloss Red
Gloss Orange
Gloss Yellow
Gloss Green
Gloss Blue
Gloss Black
Grey
Blue Ice Explosion (Dark blue metallic)
Titanium (light metalic grey)
Gunmetal (lots of different colored metallics in this)
Screamin' Eagle (textured Black, kinda Semi gloss, very nice finish)
Flat Black
Shipping is an extra $22. There is also the option of having me powder coat the radio kits for an extra $5. The Double Din kit is just a trim piece. It is not ment to hold the radio. Most Double Din decks are bolted in which means you guys would have to drill your side brackets to mount the deck. Instructions are included to make thing easier for you guys.
Double Din Radio Kit:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Radio Kit; No Holes:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Radio Kit; 3 holes Below Deck:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Radio Kit; 3 hole above deck:
1. NudeLobster (SQC)
2.
3.
4.
5.
6.
7.
8.
9.
10.
Air Diversion Pannel:
1. NudeLobster (SQC)
2.
3.
4.
5.
6.
7.
8.
9.
10.
Rear Shock Spacer: $10
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
Radio Harness $10 so you dont have to hack the factory plug off.
1. NudeLobster (SQC)
2.
3.
4.
5.
6.
7.
8.
9.
10.